195N1061 by Danfoss

The 195N1061 is a low-voltage AC variable frequency drive manufactured by Danfoss for the VLT 2800 Low Voltage Drives series. It serves as a compact controller that adjusts motor speed and torque in process equipment. This helps match energy consumption to real-time demand in automated plants.

The drive delivers a continuous mechanical output of 3.0 kW, equivalent to 4.0 HP, allowing it to operate small pumps, fans, or conveyors in the mid-power range. It accepts a line supply of 380-480 V ±10 % 50/60 Hz on a three-phase circuit, so it can be connected directly to common industrial switchgear without an autotransformer. An internal power section converts this supply to a variable pulse-width-modulated waveform while maintaining phase balance. The housing carries an IP20 protection rating, indicating finger-safe openings but no resistance to water jets, so installation must occur inside a clean electrical cabinet. Additional selections such as a standard hardware configuration, no application option, and a dedicated process profile keep parameter lists concise.

For panel builders, the drive's book-style mechanical format places power terminals on one edge and control terminals on the opposite edge, which simplifies side-by-side mounting with minimal air gaps. Operators can access parameters through the built-in display (SLCP), eliminating the need for an external keypad during setup or diagnostics. Because the unit ships without an EMC filter, any conducted-emission compliance must be achieved by fitting an external RFI filter on the supply side. The power board is supplied without a protective coating, so the product should be installed in environments free from conductive dust or high humidity to avoid premature corrosion of solder joints. Fieldbus connectivity is not included, so speed reference must be provided through analog inputs or digital terminals.