195N1014 by Danfoss

The 195N1014 is a low-voltage AC drive produced by Danfoss for panel-based motor control. It is intended for installation in control cabinets where space is limited but adjustable motor speed is required. The inverter section converts fixed mains power into a variable-frequency output that regulates induction-motor speed in automated equipment. By adjusting output frequency and voltage, it supports pumps, fans, and conveyors that need responsive speed control while reducing wasted energy during partial-load operation. This makes it suitable for compact OEM machinery that needs repeatable speed adjustment without a large footprint.

The drive is rated for 0.75 kW mechanical output, which corresponds to 1.0 HP for the connected motor. Its input supply range is 380-480 V AC at 50/60 Hz, and it is arranged for a three-phase input common in industrial power systems. This combination suits standard plant distribution and small motor loads in handling or process equipment. No application option card is installed, so specialized functions must be handled through external control logic rather than internal expansion hardware. The unit also has no fieldbus module or RFI filter, so network communication and line-side suppression must be added externally when needed.

The electronics are housed in a Bookstyle enclosure that helps conserve cabinet width and supports orderly panel layout. The housing meets IP20 protection and should be installed inside a clean electrical cabinet where it is shielded from dust and accidental contact. A built-in SLCP display shows setpoints, current values, and fault information for local access. Local status information can be read directly at the drive, which helps when checking operating conditions at the cabinet. The drive is supplied in a standard configuration with a brake, which includes an integral brake chopper to shorten deceleration times during controlled stopping. The circuit boards do not have conformal coating, so the installation area should remain free of moisture and corrosive vapors.