P50B05010DXLGN by Sanyo Denki

The Sanyo Denki P50B05010DXLGN is a high-precision servo motor within the P5 Super BL Servo Motors series, engineered for reliable performance in demanding industrial automation. This model delivers a rated output of 100 W and operates at a rated rotating speed of 3000 min^-1, with a maximum rotating speed of 4500 min^-1 ensuring dynamic response. Developed by Sanyo Denki, the motor achieves a torque constant of 0.353 N·m/Arms and a rated torque of 0.319 N·m, balancing power density with efficiency. Built to function in ambient conditions from 0 to 40°C and humidity up to 90% or less (non-condensing), it adapts seamlessly to a wide range of factory environments.

With advanced electrical characteristics, the P50B05010DXLGN features an induced voltage constant of 4.76 ±10% mV/min^-1 and a rated armature current of 1.6 Arms, delivering precise current control. In peak conditions, it withstands an instantaneous maximum stall armature current of 6.7 Arms and generates an instantaneous maximum stall torque of 0.98 N·m. The motor’s brake excitation voltage of 90 (24) V and brake excitation current of 0.08 (0.3) A support optional braking attachments, offering a brake holding torque of 0.167 N·m when rapid stops are required. At just 0.3 kg brake mass, the optional brake adds minimal inertia. The robust permanent magnet excitation system ensures consistent torque delivery and maintains structural integrity under continuous load.

Operationally, the servo motor incorporates a precision encoder rated at 2000 P/R to monitor position and speed with high resolution. The unit’s square flange of 54 mm simplifies installation and alignment in standard automation assemblies. Its vibration grade V15 compliance guarantees stable operation within general machinery standards, reducing wear on bearings and couplings. Covering protection to IP55, the motor resists limited dust ingress and water spray from any direction, while the paint finish of Munsell N1.5 minimizes reflective glare and supports durability. The combination of a 3-phase AC, 200 V supply with a compact design enables low EMI emissions and predictable thermal performance.

Integration into existing systems is streamlined through standardized mounting and connection points. The P50B05010DXLGN interfaces seamlessly with industry-standard drives and controllers, providing feedback for closed-loop control architectures and machine vision applications. Its compact form and low mass facilitate retrofits in robotics, conveyor systems, labeling and pick-and-place equipment. Engineered by Sanyo Denki, this servo motor is a versatile solution for precision motion control in industrial automation settings.