R63HNEA-R2-NS-NV-00 by Pacific Scientific
Get a Quote for R63HNEA-R2-NS-NV-00
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The R63HNEA-R2-NS-NV-00 is a servo motor manufactured by Pacific Scientific for the R Servomotors series. It uses a 5.75-inch square frame with NEMA 23 mounting holes, so it fits directly onto compact automation frames. In motion-control systems, the unit converts controlled stator current into repeatable shaft torque for driving conveyors, indexing tables, or robotic joints. A rare-earth samarium-cobalt magnet set and high-speed windings permit continuous operation across a broad speed range, while the rotor inertia remains at 0.00081 kg·m² to support rapid acceleration. Position feedback is provided by a frameless transmitter-type resolver in size 21, with no secondary sensor installed.
The electromagnetic ratings establish the continuous and transient load limits. At stall, the winding can carry 18.2 A rms while developing 8.3 Nm of torque without overheating. A 3-inch lamination stack and the standard housing help dissipate heat, while the motor has a mass of 13.0 kg. During operation, the motor attains a rated speed of 6000 rpm and can deliver up to 20.5 Nm for short intervals, providing enough torque to overcome the 0.16 Nm of static friction that may occur in couplings or gear trains. The torque constant is 0.4 Nm/A, allowing linear current-to-torque conversion during closed-loop control.
Peak operation draws 54.6 A rms to generate maximum torque. With a phase resistance of 0.23 ohm and a line-to-line inductance of 2.2 mH, the motor has a low electrical time constant that supports high-bandwidth current loops. Heat produced during these transient loads exits through a 0.51 °C/W thermal path, and the 19-minute thermal time constant indicates how quickly the winding temperature approaches a stable level. A voltage constant of 25.1 V/kRPM makes the motor compatible with typical 300 VDC bus drives. The unit has no shaft seal, so the host machine must provide any required protection against contamination.
Technical Specifications
Continuous Stall Current (rms)
18.2 A
Continuous Stall Torque
8.3 Nm
Current At Peak Torque (rms)
54.6 A
Frame Size
5.75" Square
Housing Style
Standard
Inductance (line-line)
2.2 mH
Inertia
0.81 kgm²x10?³
Magnet Material
Rare earth (samarium cobalt)
Mass
13.0 kg
Mounting Type
NEMA 23
Peak Torque
20.5 Nm
Primary Feedback
Frameless resolver, transmitter type, size 21
Product Type
Servo Motor
Rated Speed (RPM)
6000
Resistance (line-line)
0.23 Ohm
Rotor Inertia
0.00081 kg·m²
Secondary Feedback
No secondary
Shaft Seal
No shaft seal
Stack Length
3 inches
Static Friction (max)
0.16 Nm
Thermal Resistance
0.51 C/W
Thermal Time Constant
19.0 min
Torque Constant (rms)
0.4 Nm/A
Voltage Constant (rms, L-n)
25.1 V/kRPM
Winding Type
High Speed
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







