VACIII D11 by Okuma
Get a Quote for VACIII D11
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The VACIII D11 is an AC spindle drive manufactured by Okuma within the VAC Spindle Drives series. It supplies adjustable three-phase power to machine-tool spindles, allowing the CNC controller to vary rotational speed without mechanical gear changes. By converting cabinet line voltage into a controlled output waveform, the drive enables rapid acceleration, constant surface speed machining, and precise deceleration between programmed operations. It also integrates diagnostic signaling and fault monitoring to assist with identifying overloads or wiring issues.
Its power section is designed for a nominal input of 200 V AC, three-phase power, but the circuitry tolerates supply voltage excursions down to 180 V AC and up to 220 V AC without loss of regulation. Frequency compatibility ranges from 49 Hz to 62 Hz, allowing operation on industrial power systems that vary from nominal 50 or 60 Hz service. The inverter section provides 11 kW of continuous spindle power, which supports medium-sized machining centers equipped with high-speed ceramic-bearing motors. Protection devices include a 5 A alarm fuse that isolates the control logic and a 0.3 A gate fuse that protects the IGBT drive signals; each fuse operates independently to assist with fault isolation.
Operating limits help maintain thermal and mechanical stability when the drive is installed in a sealed enclosure. Cabinet air may reach 45 °C, while internal heat-sink sensors allow the module to operate at temperatures up to 55 °C before derating occurs. The electronics withstand continuous vibration levels of 0.5 g, supporting installation on moving carriages or near equipment that generates substantial vibration. Ambient humidity may reach 75% RH during normal operation, and the conformally coated circuitry can tolerate brief exposure to 95% relative humidity. The drive may be stored at temperatures ranging from -20 °C to 60 °C without compromising the required insulation clearances.
Technical Specifications
Alarm Fuse Rating
5 A
Cabinet Temp Max
45°C
Drive Type
AC Spindle Drive
Gate Fuse Rating
0.3 A
Input Frequency Max
62 Hz
Input Frequency Min
49 Hz
Input Voltage
200 V AC (3-Phase)
Input Voltage Max
220 V AC
Input Voltage Min
180 V AC
Normal Humidity Max
75%RH
Rated Capacity
11 kW
Short-term Humidity Max
95%RH
Storage Temp Max
60°C
Storage Temp Min
-20°C
Unit Temp Max
55°C
Vibration Max
0.5G
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







