VACII D22-A by Okuma
Get a Quote for VACII D22-A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The VACII D22-A spindle drive is produced by Okuma for the VAC Spindle Drives series. As a spindle-motor inverter, it accepts factory mains power and supplies variable-frequency output that governs the rotational speed and torque of machine-tool spindles. By modulating spindle motion in real time, the unit contributes to accurate metal cutting, improved surface finishes, and consistent cycle times in automated machining cells.
Primary power enters through the three labeled input terminals R, S, and T, providing clear points for phase identification during cabinet wiring. Command and status signals travel over an analog interface, so drive speed and load feedback can be scaled by simple voltage levels without digital protocol converters. Typical 0-10 V references control the target speed, while a ±10 V monitor provides real-time spindle load data to the CNC. Machine control connects to the drive through the system I/O connector XB-EX(CN1). Its mating housing, the MRP-50F01, provides keyed engagement, while the internal MRPF102 contact block carries discrete start, stop, and alarm circuits.
The drive also provides dedicated feedback connectors for high-resolution position sensors used by modern CNC control loops. Encoder signals exit through XB-EPG(CN13), and the mating MRP-20F01 plug locks to this header with a push latch so vibration cannot loosen the connection carrying incremental pulses. Resolver leads attach to XB-RES(CN3), allowing the controller to monitor the spindle angle during tool changes and other orientation-sensitive operations. Fiber-based status or diagnostic data can be routed through the XB-OPT(CNOFS) optical link, providing noise-resistant communication in electrically harsh environments. The separate encoder, resolver, and optical connections allow each signal type to use an interface suited to its electrical and operational requirements.
Technical Specifications
Encoder Connector
XB-EPG(CN13)
Encoder Plug Type
MRP-20F01
I/o Connector
XB-EX(CN1)
I/o Contact Type
MRPF102
I/o Plug Type
MRP-50F01
Interface Type
Analog Interface
Main Input Terminals
R, S, T
Optical Connector
XB-OPT(CNOFS)
Resolver Connector
XB-RES(CN3)
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







