VACII D22 by Okuma
Get a Quote for VACII D22
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The VACII D22 is a spindle drive module developed by Okuma for the VAC Spindle Drives series. It forms the power interface between an Okuma CNC controller and a high-speed spindle motor. The module converts command words from the control into precise torque, indexing, and braking actions required for metal-cutting applications.
The drive flags abnormal conditions with the alarm prefix AL, which appears before any numerical error code on the front panel. During lathe C-axis positioning, it transmits the dedicated 06 identifier, while an idle but energized spindle is represented by the standstill reference 02. Rotation commands are separated into a clockwise token of 03 and a counterclockwise token of 04; these fixed values let the CNC logic confirm that the direction of motion matches the programmed command. Separate high-winding and low-winding selections are available through the single-letter "H" and "L" codes, allowing the control to switch motor windings for different speed ranges. Operator wiring reaches the main logic through the XB-EX(CN1) I/O connector. Dedicated feedback ports accept resolver, magnetic encoder, and optical scale signals through XB-RES(CN3), XB-EPG(CN13), and XB-OPT(CNOFS), respectively.
Two selectable readout formats give the unit two display modes, allowing users to switch between operating data and diagnostic values without opening the cabinet. Real-time status appears on a seven-segment LED display beside a green status LED that indicates normal operation. An independent charge indicator illuminates in orange while the DC bus remains energized, indicating that the unit must discharge before service. The front-panel indicators provide immediate information about operating state, stored alarms, and remaining bus voltage. Multiple feedback connections allow the drive to receive position and speed data from different sensor types used across compatible spindle configurations.
Technical Specifications
Alarm Prefix
AL
C-axis Code
06
Charge Led Color
Orange
Clockwise Code
03
Counterclockwise Code
04
Display Modes
2
High-wind Code
H
I/o Connector
XB-EX(CN1)
Low-wind Code
L
Mag Encoder Connector
XB-EPG(CN13)
Optical Connector
XB-OPT(CNOFS)
Resolver Connector
XB-RES(CN3)
Standstill Code
02
Status Indicator
Seven-Segment LED
Status Led Color
Green
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







