MPS30 by Okuma
Get a Quote for MPS30
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MPS30 is a DC power supply unit produced by Okuma within the MPS Power Supplies series. Designed for machine-tool automation, the module accepts industrial three-phase power and establishes a stable DC bus for spindle inverters, axis amplifiers, and auxiliary logic circuits. It provides high-energy transfer and controlled regeneration for CNC cabinets, allowing connected motors to accelerate, decelerate, and hold position without excessive voltage fluctuations.
With a rated capacity of 30 kW, the supply can continuously deliver the power needed by multiple servo channels without derating. The main bus is maintained at 300 VDC, minimizing ripple in downstream inverters and keeping dynamic braking currents predictable. A secondary control rail of 24 VDC is available for I/O boards and sensors, separating logic loads from the high-energy link. The front end is fed by a three-phase source, distributing current across all lines to reduce conductor requirements and harmonic stress. During deceleration, the internal circuitry uses a power-regeneration mode that returns recovered energy to the grid instead of dissipating it as heat. This process reduces the thermal load inside the enclosure and improves operating efficiency.
An input overvoltage alarm is issued at 253 Vrms, prompting the controller to shut down the drives before insulation limits are exceeded. Operating states are shown on a 7-segment LED panel, and two selectable display modes allow switching between fault codes and real-time voltage readings. After shutdown, the capacitors require at least 2 minutes to discharge before the unit is re-energized. This waiting period prevents residual charge from stressing semiconductor devices. The enclosure measures 380 mm in height, 150 mm in width, and 325 mm in depth. Electrical connections are made through an M4 terminal block, and the unit weighs 11.8 kg, allowing installation in crowded control cabinets without specialized lifting equipment.
Technical Specifications
Control Output
24 VDC
Depth
325 mm
Display Modes
2
Height
380 mm
Input Overvoltage Alarm
253 Vrms
Input Phases
Three-Phase
Main Output
300 VDC
Minimum Wait After Power Off
2 min
Product Type
DC power supply unit
Rated Capacity (kW)
30 kW
Regeneration Method
Power regeneration type
Status Display
7-Segment LED
Terminal Block
M4
Weight
11.8 kg
Width
150 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







