MIV45-3-V3 by Okuma
Get a Quote for MIV45-3-V3
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV45-3-V3 is an Okuma inverter unit in the MIV Servo Drives series. It converts the fixed DC link of an Okuma machining center into controlled three-phase power for axis and spindle motors, allowing coordinated motion and speed regulation in automated cutting and forming equipment. Through integration with the machine's closed-loop control system, the unit supports precise acceleration profiles and helps protect downstream components by reporting dedicated alarms and thermal feedback to the CNC.
The drive's control circuitry is powered by a stable 24 VDC source, while the power stage receives a nominal 300 VDC bus generated by the machine's main rectifier. On the L output side, the inverter can continuously deliver a mechanical output of up to 45 kW, supporting large milling heads or synchronized multi-axis loads. If internal temperatures exceed safe limits, the unit issues the AL 05 overheat alarm, prompting the CNC to shut down the affected channel before semiconductor damage occurs. The DC bus, control supply, and continuous output ratings must be considered when pairing the module with compatible motors, protective devices, and cabinet power components.
Parameter addressing within a rack is selected through a 5-bit ID switch, allowing the control system to distinguish the module from other installed drive units. Airflow is maintained by two rear-mounted axial fans, which move cooling air across the internal power electronics during operation. The aluminum housing measures 380 mm in height, 300 mm in width, and 325 mm in depth, allowing placement beside other MIV modules without additional spacers. The unit has a mass of 24.0 kg, so cabinet rails must support its static load and the vibrational forces produced during rapid machine movements. Adequate rear clearance is also necessary to prevent nearby components or wiring from restricting fan intake and exhaust airflow.
Technical Specifications
Control Supply
24 VDC
Controller Id Switch
5-bit
Cooling Fan Count
2
Dc Bus Supply
300 VDC
Depth
325 mm
Height
380 mm
L side Capacity (hp)
60 hp
L side Capacity (kW)
45 kW
Overheat Alarm
AL 05
Product Type
Okuma Inverter Unit
Weight
24.0 kg
Width
300 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







