MIV22-3-V3 by Okuma
Get a Quote for MIV22-3-V3
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV22-3-V3 is an Okuma inverter unit in the MIV Servo Drives series. It regulates a servo motor's speed and torque on machining centers or automated cells by converting DC-link power into precisely timed three-phase outputs. By combining inverter and axis-control functions in one housing, the product simplifies cabinet wiring and supports the accurate positioning required in industrial automation. Its integrated design also reduces the number of separate control components needed within the electrical enclosure.
This drive controls a single mechanical line and therefore has a channel count of 1. Internal logic, I/O, and gate drivers use a dedicated control supply of 24 VDC, keeping the signal electronics isolated from the high-energy section. Motor power comes from a shared DC bus operating at 300 VDC, which permits rapid energy exchange between axes during regenerative moves. The L-side output is rated at 30 hp, providing power for midrange spindles or large feed axes without an external booster. The cabinet depth is 325 mm, allowing the unit to fit in back-to-back rows while preserving space for airflow and wiring. Two selectable display modes on the front panel show either operating data or alarm codes, allowing drive information to be viewed without a separate handheld console.
The unit stands 380 mm tall and measures 150 mm across the mounting rails, allowing several inverters to be installed in a standard 600 mm enclosure while leaving room for cable carriers. It has a mass of 11.2 kg and can be secured with standard panel hardware. System status is shown on a 7-segment LED, which presents drive-enable, operating, and diagnostic codes in a compact format. Membrane keys on the front face provide access to parameter groups and permit axis adjustments directly from the drive. The display and keypad arrangement keeps operating information and parameter controls accessible when the inverter is installed inside a crowded control cabinet.
Technical Specifications
Axis Count
1
Control Power
24 VDC
Dc Bus Supply
300 VDC
Depth
325 mm
Display Modes
2
Height
380 mm
L side Capacity (hp)
30 hp
L side Capacity (kW)
22 kW
Product Type
Okuma Inverter Unit
Status Display
7-Segment LED
Weight
11.2 kg
Width
150 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







