MIV15-3-V5 by Okuma
Get a Quote for MIV15-3-V5
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV15-3-V5 is an Okuma inverter unit from the MIV Servo Drives series. It serves as the power interface between an Okuma CNC controller and a servo motor, modulating DC bus energy so that position, velocity, and torque commands are accurately executed in industrial automation cells. As part of a drive stack, this unit converts power from the shared DC link into a regulated three-phase output suitable for synchronous or induction servo motors, giving machine tools the speed and accuracy required for contour cutting and rapid traverse moves.
The drive supports an applicable motor capacity of 15 kW, allowing its power section to operate continuously at that level when connected to a matched motor. It supports one axis, so its gate-drive circuitry and current sensors are dedicated to a single motor channel, simplifying tuning. The control electronics draw 24 VDC from the cabinet supply. This low-voltage rail powers the I/O, logic, and gate drivers independently of the high-energy link. The main DC bus accepts 300 VDC, allowing the inverter to share a common power supply with other axes while keeping conduction losses moderate. During lifting and installation, the enclosure mass of 11.2 kg must be considered for safe handling.
The chassis has a depth of 325 mm, a height of 380 mm, and a width of 150 mm, allowing the unit to fit beside spindle drives and power supplies in a control panel. The internal control board is the ICB3 type, which manages signal routing and supports the Control ROM type 5 parameter set. Field wiring connects to terminal blocks secured by XT1 M6 and XT2 M8 screws, providing adequate clamping force for the motor and bus conductors. The enclosure dimensions should be considered when planning mounting clearances, cable bends, and airflow around adjacent drive components.
Technical Specifications
Applicable Motor Capacity
15 kW
Axis Count
1
Control Board Type
ICB3
Control Power
24 VDC
Control Rom Type
5
Dc Bus Supply
300 VDC
Depth
325 mm
Height
380 mm
Product Type
Okuma Inverter Unit
Weight
11.2 kg
Width
150 mm
Xt1 Screw Size
M6
Xt2 Screw Size
M8
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







