MIV08A-1-B5 by Okuma
Get a Quote for MIV08A-1-B5
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV08A-1-B5 is an inverter unit produced by Okuma for the MIV Servo Drives series. As a single-axis drive interface, it governs BL/PREX servo or spindle motors on machining centers and automated cells, translating command signals into regulated three-phase power for precise speed and torque control. By combining the inverter and servo regulator in one enclosure, the design provides a compact module that connects directly to the machine's DC bus and uses a separate logic rail for internal sequencing.
This unit controls one motion axis. The logic electronics operate from a 24 VDC control supply, isolating sensitive circuits from the high-energy link. The power section accepts a steady 300 VDC bus, which supplies the output bridge after current feedback and fault monitoring. The inverter has a rated capacity of 7.5 kW, supporting the power demands of rapid acceleration and continuous machine operation. Despite the integrated reactors and gate drivers, the enclosure has a mass of 5.5 kg, which reduces the mounting load within the control cabinet. Resolver feedback and internal current loops allow the controller to regulate compatible motors during speed, torque, and positioning operations.
Heat removal relies on two external cooling fans mounted in a push-pull arrangement. The upper fan insert carries part number SA001-0919-144A00, while the lower fan insert is SA001-0919-145A00. The rectangular enclosure measures 295 mm deep, 380 mm high, and 100 mm wide. These dimensions allow the unit to fit beside neighboring drives while leaving space for cable routing and ventilation. The paired fans move air through the enclosure to remove heat from the power electronics during continuous machining cycles. Clear airflow paths around the housing help prevent recirculation of heated air within the cabinet.
Technical Specifications
Axis Count
1
Control Supply
24 VDC
Cooling Fans
2 External
Dc Bus Supply
300 VDC
Depth
295 mm
Height
380 mm
Lower Fan Part
SA001-0919-145A00
Motor type
BL/PREX
Product type
Okuma Inverter Unit
Rated Capacity
7.5 kW
Upper Fan Part
SA001-0919-144A00
Weight
5.5 kg
Width
100 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







