MIV08-1-B1 by Okuma
Get a Quote for MIV08-1-B1
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV08-1-B1 servo drive is produced by Okuma for the MIV Servo Drives series. Classified as an inverter unit, it converts rectified DC from the machine's power supply into a controlled three-phase output for integrated BL and PREX motors. Through its servo, encoder, and converter links, the unit closes the control loop with the CNC so that feed or spindle axes can accelerate, decelerate, and position with repeatable accuracy.
The drive has an axis count of 1, which simplifies wiring and control allocation in smaller machining cells. The applicable motor capacity for this channel reaches 7.5 kW. Internal capacitors store link energy on a bus operating at 300 VDC, while an external 24 VDC supply powers the logic section. This separate control supply allows feedback and diagnostic functions to remain active when the main power is isolated. Commands and feedback signals are processed on an ICB1 control board, while Control ROM type 1 stores the operating parameters. A front-mounted 7-segment LED displays alarm and status codes for direct viewing inside the cabinet. The unit has a mass of 7.3 kg, making it suitable for installation in a vertical electrical cabinet.
The enclosure measures 100 mm in width, 325 mm in depth, and 380 mm in height. These dimensions allow the drive to be installed beside additional MIV modules while preserving the clearances needed for airflow and cable routing. Motor identification is handled through the encoder path, allowing the drive to operate with compatible BL or PREX motor families. The separate servo, encoder, and converter connections support coordinated communication between the inverter, motor, power section, and CNC. Communication remains active whenever the 24 V control power is available, allowing stored fault histories and status information to be accessed before the unit is removed.
Technical Specifications
Applicable Motor Capacity
7.5 kW
Axis Count
1
Communication Links
Servo / Encoder / Converter
Control Board Type
ICB1
Control Power
24 VDC
Control Rom Type
1
Dc Bus Supply
300 VDC
Depth
325 mm
Height
380 mm
Horsepower Rating
10 hp
Motor type
BL / PREX Motor
Product type
Okuma Inverter Unit
Status Display
7-Segment LED
Weight
7.3 kg
Width
100 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







