MIV06DB-1-B1 by Okuma
Get a Quote for MIV06DB-1-B1
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV06DB-1-B1 is an inverter unit produced by Okuma for the MIV Servo Drives series. It converts a regulated DC bus into controlled three-phase power for servo motion in computer numerical control machinery. The module is intended for integration with one BL or PREX motor, delivering the speed and torque required to position an axis or drive a spindle within an automated machining center. This product type forms part of the drive stack in lathes, machining centers, and similar equipment where synchronized multi-axis control is essential.
The inverter derives logic power from a 24 VDC control supply, while its power stage is fed by a 300 VDC bus shared by the machine's power distribution system. On the L-side, it can deliver 6.0 kW of continuous output to a single axis, making it suitable for midrange BL and PREX motors. Control is executed by the ICB1 inverter board, and operational parameters are stored in Standard ROM 1. Motor currents are transmitted through terminals U, V, and W. Closed-loop velocity feedback is available through a speed monitor signal scaled at 1562 min?¹/V for drive diagnostics. The DCA/DCB link uses connector 1-178137-2, whereas AC input is accepted through connector 1-179276-2, providing dedicated connection points for the associated wiring.
The aluminum chassis measures 100 mm in width, 325 mm in depth, and 380 mm in height, allowing multiple units to be mounted side by side within Okuma control cabinets. Torque load information is transmitted through a monitor output that reaches 3 V at full scale and terminates at the SR connector 53460-0611. Encoder power and shield continuity are handled by the EPG connector D02-M15SAG-13L9, helping keep feedback lines isolated from the power stage. Signals are routed through dedicated channels to reduce interface complexity. The standardized motor output phases permit direct connection to factory-wired BL and PREX motor leads.
Technical Specifications
Ac Connector Type
1-179276-2
Axis Count
1
Compatible Motor Type
BL motor, PREX motor
Control ROM type
Standard ROM 1
Control Supply
24 VDC
Dc Bus Supply
300 VDC
Dca/dcb Connector Type
1-178137-2
Depth
325 mm
Epg Connector Type
D02-M15SAG-13L9
Height
380 mm
Inverter control board type
ICB1
L side Capacity (hp)
8 hp
L side Capacity (kW)
6.0 kW
Motor Output Phases
U, V, W
Product Type
Okuma Inverter Unit
Speed Monitor Scale
1562 min-1/V
Sr Connector Type
53460-0611
Torque Monitor Full Scale
3 V
Width
100 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







