MIV06-1-B1 by Okuma
Get a Quote for MIV06-1-B1
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV06-1-B1 is an inverter unit manufactured by Okuma for the MIV Servo Drives series. As a drive module, it converts high-voltage DC from a common bus into regulated three-phase power for one BL or PREX servo motor, allowing CNC machine axes to accelerate, decelerate, and hold position under closed-loop control. The module forms the electrical interface between the machine controller and the mechanical motion hardware used in industrial automation cells.
A dedicated control input of 24 VDC supplies the logic boards, keeping parameter memory available and status LEDs illuminated even when the main bus is off. Power for the output stage is drawn from a shared link rated at 300 VDC, giving the IGBTs enough headroom to synthesize sinusoidal waveforms across the full speed range. The L-side output can continuously deliver 6.0 kW, which supports mid-frame rotary and linear motor loads used on milling tables, turrets, and loaders. Thermal regulation is handled by two axial fans mounted on the enclosure's top plate. These fans pull air across the heat sink to keep junction temperatures within safe limits during sustained rapid-traverse cycles.
The unit controls a single axis, and an internal 5-bit rotary switch assigns the drive's address on the proprietary servo, encoder, and converter communication loops without software intervention. The enclosure is only 100 mm wide, allowing the drive to fit into compact control cabinets while maintaining room for adjacent modules. A face height of 380 mm and a depth of 325 mm provide space for cable bends and airflow channels. Compatibility with BL and PREX motors allows the drive to support high-torque or high-speed motion applications. The servo, encoder, and converter link simplifies wiring by routing commands, feedback, and diagnostic data through one harness.
Technical Specifications
Axis Count
1
Communication Links
Servo / Encoder / Converter
Control Supply
24 VDC
Controller Id Switch
5-bit
Cooling Fan Count
2
Dc Bus Supply
300 VDC
Depth
325 mm
Height
380 mm
L side Capacity (hp)
8 hp
L side Capacity (kW)
6.0 kW
Motor Type
BL / PREX
Product Type
Okuma Inverter Unit
Width
100 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







