MIV0505A-1-B1 by Okuma
Get a Quote for MIV0505A-1-B1
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV0505A-1-B1 inverter unit is manufactured by Okuma as part of the MIV Servo Drives series. Designed for CNC and general motion tasks, the device converts rectified power into controllable outputs for paired servo amplifiers, enabling coordinated speed and position control inside machine tools and automated handling cells. By integrating drive electronics and overload protection into a single module, it streamlines panel wiring and supplies the regulated DC bus that synchronized axes require during rapid interpolation and feed-rate changes.
Each MIV0505A-1-B1 channel delivers motion power to two independent axes, allowing a compact controller to manage multiple machine movements. Internal logic runs from a dedicated 24 VDC control rail, so low-voltage faults can be isolated from high-energy bus events. The common DC link is maintained at 300 VDC, giving the connected amplifiers a fixed energy reservoir for acceleration and regenerative braking. Continuous output is rated at 5.0 kW per axis; this rating represents the mechanical work the drive can sustain without thermal derating when the machine cuts at its nominal load. Heat produced by switching devices is removed by an external fan that pulls air across the heat sink and prevents cabinet temperature increases from affecting neighboring electronics. Despite its dual-axis capacity, the unit weighs only 6.5 kg, simplifying rail installation and minimizing vibration loads on the enclosure.
The housing stands 380 mm tall and occupies 100 mm of frontal width, providing clear dimensions for panel layout. It extends 295 mm behind the mounting plane, allowing installers to account for the required cabinet depth before positioning adjacent equipment. These proportions permit side-by-side stacking with other MIV modules while leaving sufficient clearance for airflow channels and cable bending radii inside shallow electrical cabinets.
Technical Specifications
Axis Count
2
Control Supply Voltage
24 VDC
Cooling Method
External Fan
Dc Bus Voltage
300 VDC
Depth
295 mm
Height
380 mm
Product Type
Okuma Inverter Unit
Rated Continuous Capacity Per Axis
5.0 kW
Weight
6.5 kg
Width
100 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







