MIV04A-1 by Okuma
Get a Quote for MIV04A-1
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV04A-1 inverter module is supplied by Okuma as part of the MIV Servo Drives series. Classified as an Okuma inverter unit, it converts the 300 VDC link voltage into a controlled three-phase output for BL/PREX servo motors on a single machine axis. In a CNC machine or automated cell, the module executes current, velocity, and position commands generated by the host motion controller. Closed-loop regulation allows the connected motor to produce precise tool or table movement under changing operating loads.
The module controls one axis, so each additional motion channel in a system requires a separate unit. Its logic section accepts a stable 24 VDC control supply, isolating signal circuits from the power electronics. Energy for motor excitation arrives through the shared DC link at 300 VDC, and the internal IGBT bridge modulates this bus to produce an AC waveform. During continuous operation, the inverter can deliver up to 4.0 kW to the motor windings without derating. Diagnostic outputs provide direct operating data for monitoring the connected axis. A speed monitor scale of 1562 rpm/V converts the tachometer voltage into a corresponding motor speed, while the torque monitor assigns 3 V to full load so mechanical loading can be observed with a standard voltmeter.
The rectangular enclosure stands 380 mm high, spans 60 mm across the mounting rail, and measures 295 mm deep. Its narrow width conserves rail space when several inverter modules are installed beside one another in a multi-axis cabinet. With a mass of 5.0 kg, the unit can be positioned and secured without lifting equipment. A 5-bit controller ID switch assigns a unique device address when the module operates as a network slave. This addressing arrangement directs command traffic to the intended axis and distinguishes the module from other devices on the network. Compatibility with the BL/PREX motor family allows the same power stage to operate with different motor frame sizes that use compatible encoder protocols.
Technical Specifications
Axis Count
1
Control Power
24 VDC
Controller Id Switch
5-bit
Dc Bus Supply
300 VDC
Depth
295 mm
Height
380 mm
Motor Type
BL/PREX
Network Role
Slave
Product Type
Okuma Inverter Unit
Rated Continuous Capacity
4.0 kW
Speed Monitor Scale
1562 min-1/V
Torque Monitor Ref
3 V
Weight
5.0 kg
Width
60 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







