MIV0404-1-B3 by Okuma

Rated 5.0 stars (15 reviews)

Get a Quote for MIV0404-1-B3

Request a quote or call us now at 1-888-551-3082!

In-Stock, Ships 3-5 Days

We respect your privacy. Your information is safe and will never be shared.

Secure Online
Checkout

Free Ground
Shipping

One Year
Warranty

The MIV0404-1-B3 is an inverter unit manufactured by Okuma within the MIV Servo Drives series. It interfaces with the CNC control to generate three-phase output waveforms that regulate servo motor speed and torque in machine tools and other automated equipment. By converting power from the DC bus into modulated voltages for each connected motor, the unit serves as the power stage of a closed-loop motion system. This arrangement allows the CNC control to adjust motor current in response to commanded movements and feedback from the machine axes.

This model has a two-axis configuration, so one housing can issue separate speed and torque commands to two servo motors. Each channel is rated for up to 4.0 kW of output, making the unit suitable for midsize feed or spindle drives. It supports the BL and PREX motor families, allowing the same inverter platform to operate with either supported motor design. The internal power section draws energy from a 300 VDC link, while signal processing and gate-drive circuits use a separate 24 VDC control supply. This separation allows the control electronics and motor power stage to operate from their designated sources. The housing has a 100 mm width, a 380 mm height, and a 325 mm depth, allowing it to fit beside additional inverter modules on standard mounting rails without special spacers.

Command calculations are performed by an ICB1 inverter control board that manages pulse-width modulation generation, fault detection, and parameter storage. Operating status and alarms appear on a front-panel display with a 2 × 7-segment LED arrangement, providing readable numeric codes for diagnostic review. The two-character display presents operating information without requiring a separate external display panel. The housing has a mass of 7.8 kg, which limits the load placed on vertical control-cabinet supports while providing sufficient thermal mass for continuous operating cycles. Its compact dimensions also leave room for adjacent drive components and the clearances needed for cable routing inside the cabinet.

Technical Specifications

Applicable Motor Capacity
4.0 kW × 4.0 kW

Applicable Motor Power
5.3 hp × 5.3 hp

Axis Configuration
2-Axis

Compatible Motor Type
BL motor, PREX motor

Control Voltage
24 VDC

Depth
325 mm

Height
380 mm

Input Bus Voltage
300 VDC

Inverter control board type
ICB1

Product type
Okuma Inverter Unit

Status Display
2 x 7-Segment LED

Weight
7.8 kg

Width
100 mm

Click here for product datasheet

Contact Us

1620 Old Apex Road, Cary, NC 27513, USA

Toll Free: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Email: sales@wakeindustrial.com

Shipping Options

DHLFedExUPSFreight

Payment Methods

American ExpressMasterCardVisaWire Transfer

Need Assistance?

Our team is here to help you find the right part for your needs.

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Automation Factory warranty on ALL products