MIV0404-1-B1 by Okuma

Rated 4.8 stars (16 reviews)

Get a Quote for MIV0404-1-B1

Request a quote or call us now at 1-888-551-3082!

In-Stock, Ships Today

We respect your privacy. Your information is safe and will never be shared.

Secure Online
Checkout

Free Ground
Shipping

One Year
Warranty

The MIV0404-1-B1 is an Okuma inverter unit supplied under the MIV Servo Drives series. The module operates as a servo drive that regulates power for machine-tool feed and spindle axes, linking the controller to supported BL or PREX servo motors. By converting DC-bus energy into precise three-phase outputs, the unit keeps multiple axes synchronized during contour cutting, positioning, and high-speed tapping on CNC equipment.

This drive governs 2 channels, designated as the L and M sides, so one housing can command both motor groups. The two-channel output rating is 4.0 kW × 4.0 kW, providing equal power for orthogonal slides in midsize machining centers. A shared DC link rated at 300 VDC supplies the inverter section, while the logic and gate circuitry use a separate 24 VDC control supply. This separation helps protect signal processing from disturbances in the primary power circuit. The inverter uses the ICB1 control board for processing motor commands and managing output operation. Its internal arrangement combines a control board, display card, and inverter, providing local status information without requiring additional interface hardware. Compatibility with BL and PREX motor families allows the cabinet to support different motor configurations.

The module weighs 7.8 kg, which supports rack installation while providing sufficient heat-sink mass for operation under changing loads. Its 100 mm width conserves panel space in densely arranged machine enclosures. The 380 mm height allows the unit to fit beneath standard CNC power sections, while its vertical format leaves neighboring panel space available for related modules. A 325 mm depth provides room within the chassis while allowing installation space behind the unit for bus bars, connectors, and cooling ducts. Adequate rear clearance also helps prevent power and feedback cables from being routed with bends that are too tight. These physical dimensions support installation in machine cabinets where panel width, internal depth, airflow, and cable routing must all be considered.

Technical Specifications

Axis Count
2

Axis Sides
L/M

Compatible Motor Type
BL motor, PREX motor

Control ROM type
Standard ROM 1

Control Supply
24 VDC

Dc Bus Supply
300 VDC

Depth
325 mm

Height
380 mm

Inverter control board type
ICB1

Product type
Okuma Inverter Unit

Rated Capacity
4.0 kW x 4.0 kW

Unit Configuration
Control Board + Display Card + Inverter

Weight
7.8 kg

Width
100 mm

Click here for product datasheet

Contact Us

1620 Old Apex Road, Cary, NC 27513, USA

Toll Free: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Email: sales@wakeindustrial.com

Shipping Options

DHLFedExUPSFreight

Payment Methods

American ExpressMasterCardVisaWire Transfer

Need Assistance?

Our team is here to help you find the right part for your needs.

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Automation Factory warranty on ALL products