MIV0303-1-B1 by Okuma
Get a Quote for MIV0303-1-B1
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV0303-1-B1 inverter module is produced by Okuma as part of the MIV Servo Drives series. Intended for integration into CNC machining centers, the unit converts DC-bus energy into a controlled three-phase output for individual feed or spindle motors. It regulates current and voltage so the machine control can issue accurate position, velocity, and torque commands. This controlled power conversion supports automated metal-cutting and material-handling operations that require stable motor response during rapid acceleration, steady travel, and controlled deceleration.
The module is factory-configured to operate with BL motors and PREX motors, allowing its current loops and commutation tables to match those rotor designs. Switching activity is managed by the ICB1 inverter control board, which monitors gate signals, temperature, and overcurrent conditions while coordinating the power stage. The L-side output channel has a capacity of 4 hp, or 3.0 kW, making it suitable for a mid-sized linear axis or auxiliary spindle. Protective monitoring helps prevent abnormal electrical or thermal conditions from damaging the inverter stage or connected motor.
The independent M-side output channel also has a capacity of 4 hp, or 3.0 kW, allowing it to power a second axis with the same output capability. The unit is classified as an Okuma inverter unit and supplies vector-controlled three-phase power while upstream servo processors close the feedback loops. Its connector arrangement and panel dimensions support installation in compatible Okuma drive assemblies. The heat sink, bus bars, and fiber-optic connections align with the corresponding chassis interfaces, helping maintain secure electrical and mechanical connections. Diagnostic functions report operating conditions through the drive system so faults involving current, temperature, or switching behavior can be identified by the machine control.
Technical Specifications
Compatible Motor Type
BL motor, PREX motor
Control ROM type
Standard ROM 1
Inverter control board type
ICB1
L side Capacity (hp)
4 hp
L side Capacity (kW)
3.0 kW
M side Capacity (hp)
4 hp
M side Capacity (kW)
3.0 kW
Product Type
Okuma Inverter Unit
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







