MIV03-1-P by Okuma
Get a Quote for MIV03-1-P
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV03-1-P servo inverter is produced by Okuma within the MIV Servo Drives series. As an inverter unit, it converts DC-bus energy into the variable-frequency output required by compatible AC servo modules and carries encoder data across shared signal links. Encoder feedback allows the controller to compare actual motor movement with commanded velocity and position values. The inverter then regulates power to the connected motor so the machine axis can follow programmed motion accurately during industrial automation and machining processes.
The module manages 1 axis through synchronized servo, encoder, and converter links that carry command and feedback signals among the CNC, motor, and internal converter section. Its continuous output is 3.0 kW, providing adequate electrical capacity for medium-frame feed drives without thermal derating. Internal logic and interface circuits operate from a 24 VDC control supply, while the power stage receives energy from a shared 300 VDC bus connected to companion inverters. A five-bit ID switch provides address selection for the module, allowing the control system to distinguish it from other drives connected through the same communication architecture.
The aluminum chassis measures 60 mm in width and 380 mm in height, allowing the module to fit beside larger spindle drives without obstructing the intended cabinet airflow. Its narrow profile conserves horizontal mounting space while providing sufficient vertical surface area for the internal power electronics and heat sink assembly. The installation depth is 325 mm, allowing the heat sink to clear standard rail positions while leaving room for acceptable cable bend radii within the enclosure. The module has a mass of 5.7 kg, which limits the static load placed on cabinet rails and mounting supports.
Technical Specifications
Axis Count
1
Communication Links
Servo/Encoder/Converter
Continuous Capacity
3.0 kW
Control Supply
24 VDC
Dc Bus Supply
300 VDC
Depth
325 mm
Height
380 mm
Id Switch Bits
5-Bit
L side Capacity (hp)
4 hp
L side Capacity (kW)
3.0 kW
Product Type
Okuma Inverter Unit
Weight
5.7 kg
Width
60 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







