MIV0204-1-B1 by Okuma

Rated 4.7 stars (18 reviews)

Get a Quote for MIV0204-1-B1

Request a quote or call us now at 1-888-551-3082!

In-Stock, Ships 3-5 Days

We respect your privacy. Your information is safe and will never be shared.

Secure Online
Checkout

Free Ground
Shipping

One Year
Warranty

The MIV0204-1-B1 is an inverter unit produced by Okuma as part of the MIV Servo Drives series. Designed for installation in the drive cabinets of lathes and machining centers, it converts power from a common DC link into independently modulated outputs for two servo axes. By controlling BL or PREX motors, it supplies vector-regulated power that positions slides, spindles, and tool changers with repeatable accuracy in industrial automation.

The unit governs two axes, allowing one housing to serve both the left and right channels of a multi-spindle machine. The shared DC link receives 300 VDC, and the internal inverter control board marked ICB1 sequences pulse-width modulation for each motor phase. The control electronics draw power from a separate 24 VDC supply, so the logic can remain active during main bus shutdowns for alarm retention and safe-stop routines. The power section on the left side is rated at 2.67 hp, enabling rapid acceleration of small servo motors without requiring an oversized cabinet transformer. These electrical ratings are stored in the Standard ROM 1 program set and coordinate with feedback scaling to maintain stable torque loops while limiting thermal stress on the connected motors.

The enclosure measures 100 mm wide and 380 mm high, with a depth of 325 mm and a mass of 7.8 kg. Its compact dimensions permit side-by-side mounting of several units without exceeding the airflow clearances recommended for the MIV platform. The integrated speed monitor produces a proportional output of 1562 rpm/V, allowing the CNC to verify rotor speed directly from the drive without additional sensors. Mechanical brackets and backplane connectors use a common arrangement across the MIV Servo Drives series, supporting consistent installation in machine cabinets. The independent axis channels also allow the connected motors to receive separate motion commands while drawing energy from the same DC bus.

Technical Specifications

Axis Count
2

Compatible Motor Type
BL motor, PREX motor

Control Power
24 VDC

Control ROM type
Standard ROM 1

Dc Bus Voltage
300 VDC

Depth
325 mm

Height
380 mm

Inverter control board type
ICB1

L side Capacity (hp)
2.67 hp

L side Capacity (kW)
2.0 kW

Product Type
Okuma Inverter Unit

Speed Monitor Scale
1562 min-1/V

Weight
7.8 kg

Width
100 mm

Click here for product datasheet

Contact Us

1620 Old Apex Road, Cary, NC 27513, USA

Toll Free: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Email: sales@wakeindustrial.com

Shipping Options

DHLFedExUPSFreight

Payment Methods

American ExpressMasterCardVisaWire Transfer

Need Assistance?

Our team is here to help you find the right part for your needs.

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Automation Factory warranty on ALL products