MIV0202-1-B1 by Okuma
Get a Quote for MIV0202-1-B1
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV0202-1-B1 inverter unit is supplied by Okuma for the MIV Servo Drives series. It is intended for closed-loop control of feed or spindle axes inside computer numerical control equipment. Operating as the power stage of the drive system, the module converts power from the DC bus into three-phase outputs for each connected motor, allowing the controller to adjust velocity, torque, and position in real time. Separate L and M channels inside the housing allow two independent motion axes to be served by a single chassis, simplifying wiring and conserving panel space in multi-axis machining centers.
The L side is designed to energize either a BL motor or a PREX motor, providing compatibility with low-cogging feed servos and high-density spindle motors without internal changes. Parameter data for that channel is stored in Standard ROM 1, supporting the baseline operating functions and alarm handling of the MIV platform. Gate timing and current sensing are handled by the dedicated control board identified as ICB1, which coordinates the carrier frequency with the CNC command cycle. Continuous output on the L side is rated at 2.67 hp, providing power for medium-size linear axes or compact turning spindles while remaining within the thermal capacity of an air-cooled cabinet.
A second inverter section provides equivalent control functions for the M channel, where the continuous mechanical output is limited to 2.67 hp on the M side. Placing both channels in one assembly allows them to share bus capacitance and supports streamlined fault reporting through the fiber-optic link to the CNC. The inverter unit uses standardized connectors and parameter menus that are compatible with the associated Okuma drive system. Its separate channel controls allow each connected axis to receive independent current commands while operating from the common DC bus. The shared chassis also reduces the number of individual power-stage modules and cable runs required in a multi-axis control panel.
Technical Specifications
Compatible Motor Type
BL motor, PREX motor
Control ROM type
Standard ROM 1
Inverter control board type
ICB1
L side Capacity (hp)
2.67 hp
L side Capacity (kW)
2.0 kW
M side Capacity (hp)
2.67 hp
M side Capacity (kW)
2.0 kW
Product Type
Okuma Inverter Unit
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







