MIV0104A-1-B5 by Okuma
Get a Quote for MIV0104A-1-B5
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV0104A-1-B5 is an inverter module produced by Okuma in the MIV Servo Drives series. Designed for CNC and general machine-tool installations, this unit conditions the shared DC bus and regulates two motor axes so command loops can control positioning or spindle functions precisely. By switching the bus voltage into pulse-width-modulated phase currents, it enables closed-loop speed and torque control in Okuma servo systems used throughout automated manufacturing lines.
The drive accepts a control supply of 24 VDC, which powers logic circuits and gate drivers independently of the main bus. The main converter section connects to a common rail at 300 VDC, giving the IGBT bridge the voltage needed for rapid current transitions during acceleration or regeneration. With 2 axes on board, the module services both the L and M channels; the left-side output is rated at 1.0 kW (1.33 hp), while the other channel handles 1.8 kW through 4.0 kW, equivalent to 2.4 hp through 5.3 hp. The applicable motor combination is 1.8 kW × 4.0 kW, allowing mixed-capacity pairing without additional hardware. Internal voltage feedback is scaled by a factor of 1/42; this scaling factor linearizes the error signal that the control CPU uses for overvoltage and undervoltage detection.
The housing measures 380 × 60 × 295 mm, so multiple units can be arranged in a cabinet with minimal spacing. The heat sink contributes to the overall weight of 5.5 kg, providing thermal inertia without placing an excessive load on the panel. A speed-monitor terminal delivers 1562 rpm/V, allowing drives and PLC cards to read the analog signal directly and confirm commanded velocity. The torque monitor provides a reference of 3 V, establishing a proportional scale for observing load during cutting or feed operations. Power wiring terminates on an M6 upper screw, while feedback and low-level lines terminate on an M4 lower screw, simplifying segregated cable routing.
Technical Specifications
Applicable Motor Capacity
1.8 kW x 4.0 kW
Applicable Motor Capacity (hp)
2.4 hp x 5.3 hp
Control Power
24 VDC
Dc Bus Supply
300 VDC
Dimensions
380 x 60 x 295 mm
Drive Axes
2
L side Capacity (hp)
1.33 hp
L side Capacity (kW)
1.0 kW
Lower Terminal Screw
M4
Product Type
Okuma Inverter Unit
Speed Monitor Scale
1562 min-1/V
Torque Monitor Ref
3 V
Upper Terminal Screw
M6
Voltage Error Multiplier
1/42
Weight
5.5 kg
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







