MIV0104-1-B2 by Okuma
Get a Quote for MIV0104-1-B2
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV0104-1-B2 is an Okuma inverter unit in the MIV Servo Drives series. Designed for machine tools and general automation platforms, it acts as a bidirectional power interface between a DC bus and two servo axes, delivering regulated current to either a BL motor or a PREX motor. Within an Okuma control cabinet, the drive communicates with motion controllers and provides position and speed regulation for feed or spindle applications in computer numerical control equipment. Its two-channel architecture allows separate motors to operate from a shared power stage while following independent motion commands.
The inverter section supports a motor power range of 1.8 kW to 4.0 kW, and its dual-channel topology handles 2 axes simultaneously. Internal logic and gate drivers are powered by a dedicated 24 VDC control supply, while the main power stage receives energy from a 300 VDC link created by the upstream converter. The enclosure measures 380 × 100 × 325 mm, allowing the unit to fit into narrow cabinet columns beside other MIV modules. The installed inverter control board is an ICB1, which carries gate-array logic for current vector processing and fault monitoring. Compatible motor data are held in nonvolatile memory so the appropriate parameter set for a BL or PREX motor can be called when each axis is initialized.
The left-hand output channel has a continuous rating of 1.0 kW, allowing it to power light feed drives without thermal derating. Program data are stored on Standard ROM 2, which provides diagnostic and gain-tuning routines used with newer OSP controls. A mass of 7.8 kg keeps the panel load manageable, allowing standard mounting rails or bolt-in shelves to support the enclosure without extra bracing. The two-axis design also shortens wiring runs between the power stage, connected motors, and encoder feedback junctions. Service access remains available from the cabinet side, where connections can be inspected without disturbing adjacent drive modules.
Technical Specifications
Applicable Motor Capacity
1.8 kW × 4.0 kW
Axis Count
2
Compatible Motor Type
BL motor, PREX motor
Control Power
24 VDC
Control ROM type
Standard ROM 2
Dimensions (h×w×d)
380 × 100 × 325 mm
Inverter control board type
ICB1
L side Capacity (hp)
1.33 hp
L side Capacity (kW)
1.0 kW
Product Type
Okuma Inverter Unit
Supply Voltage
300 VDC
Weight
7.8 kg
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







