MIV0104-1-B1 by Okuma
Get a Quote for MIV0104-1-B1
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV0104-1-B1 is an Okuma inverter unit supplied under the MIV Servo Drives series. It converts DC-link energy from an Okuma power supply into phase-controlled waveforms that operate independent servo axes, allowing machine tools to position slides and spindles with closed-loop precision. Support for BL and PREX brushless motors enables the unit to serve as the electrical interface between the numerical controller and the mechanical motion system. Its dual-channel design allows separate motors to be controlled from one compact inverter housing.
The drive is configured for two-axis operation, providing one L-side channel and one M-side channel. The L-side channel delivers 1.0 kW, or 1.33 hp, while the M-side channel is rated for 4.0 kW. These channel ratings allow the housing to operate a light feed motor and a larger PREX motor. Internal logic and gate drivers receive power from a dedicated 24 VDC control rail, allowing fault reporting to continue when the main link is de-energized. The converter operates from a regulated 300 VDC bus shared with other MIV modules. Standard ROM 1 stores the current-loop and alarm-table data, while the ICB1 inverter control board performs real-time pulse-width modulation processing. The unit belongs to the first generation of the product line and supports early OSP control platforms.
The housing has a width of 100 mm, a frontal height of 380 mm, and a mounting depth of 325 mm. This narrow profile permits multiple drive units to be installed side by side behind the machine panel without requiring excessive cabinet space. A mass of 7.8 kg limits the static load placed on the mounting backplate and makes the unit easier to position during installation. All connectors are located on the front face, allowing access to power, motor, and control wiring when adjacent modules are installed with minimal spacing. The front-access arrangement also permits cable inspection without removing neighboring inverter units from the cabinet.
Technical Specifications
Applicable Motor Capacity
1.8 kW × 4.0 kW
Axis Configuration
2-Axis
Compatible Motor Type
BL motor, PREX motor
Control ROM type
Standard ROM 1
Control Supply
24 VDC
Dc Bus Voltage
300 VDC
Depth
325 mm
Height
380 mm
Inverter control board type
ICB1
L side Capacity (hp)
1.33 hp
L side Capacity (kW)
1.0 kW
M-side Unit Capacity
4.0 kW
Product Type
Okuma Inverter Unit
Unit Generation
First Generation
Weight
7.8 kg
Width
100 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







