MIV0103-1-B1 by Okuma
Get a Quote for MIV0103-1-B1
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV0103-1-B1 inverter unit is produced by Okuma and belongs to the MIV Servo Drives series. This inverter conditions incoming DC-link power and modulates it for individual motor axes on CNC machining centers and automated cells. By providing precise current loops and pulse-width-modulated voltage, the unit enables the accurate speed and position regulation needed for coordinated multi-axis motion in industrial automation. Its dual-section arrangement allows two motor loads with different power requirements to operate from the common DC bus.
The unit is compatible with the BL motor and PREX motor families, so its current ratings and feedback interfaces align with those Okuma servomotor series. The left-hand inverter section, identified as the L side, can deliver up to 1.33 hp, or 1.0 kW, of continuous mechanical output. This capacity is suitable for feed axes that require moderate thrust, including tool turrets and automatic loaders. Sinusoidal pulse-width modulation supports smooth torque production across the operating speed range. These output values apply at the baseline voltage provided by the common DC bus and correspond to the thermal limits of compatible motor windings.
Higher-demand axes connect to the right-hand inverter section, identified as the M side, which is rated for 4 hp, or 3.0 kW, of continuous output. This section provides sufficient capacity for spindle orientation, rapid-traverse mechanisms, or auxiliary hydraulic pumps. Operating code is stored in a Standard ROM 1 module, keeping parameter structures, alarm codes, and tuning routines consistent with the baseline release used by the MIV platform. Gate switching, current sensing, and interface logic reside on the ICB1 inverter control board. The board controls carrier frequency, dead-time compensation, and protection sequencing for both inverter sections while supporting vector control, stall prevention, and fault isolation without external retrofit boards.
Technical Specifications
Compatible Motor Type
BL motor, PREX motor
Control ROM type
Standard ROM 1
Inverter control board type
ICB1
L side Capacity (hp)
1.33 hp
L side Capacity (kW)
1.0 kW
M side Capacity (hp)
4 hp
M side Capacity (kW)
3.0 kW
Product Type
Okuma Inverter Unit
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







