MIV01-1-B5 by Okuma
Get a Quote for MIV01-1-B5
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MIV01-1-B5 is an inverter unit produced by Okuma for the MIV Servo Drives series. Designed as a single-axis servo drive, the module interfaces with BL or PREX motors to provide precise velocity and position control in CNC machining centers and other automated equipment. By converting power from a regulated DC bus into a dynamic three-phase output, the unit forms the power stage between numerical controllers and servo actuators. This arrangement allows the controller to adjust motor torque and speed in response to motion commands and feedback signals.
The drive controls one axis, allowing it to operate an independent feedback loop without sharing resources across multiple channels. Internal logic and I/O circuits are supported by a 24 VDC control supply, which keeps the signal circuitry energized when the main bus is isolated. Power for the inverter bridge comes from a 300 VDC main supply that matches the common DC link used in Okuma multi-axis cabinets. At low motor speeds, the converter can deliver up to 1.0 kW of continuous mechanical output for applications that require sustained torque. The unit has a mass of 5.7 kg, allowing it to be mounted directly on a vertical back panel without additional structural bracing. Compatibility with BL and PREX motor families supports the use of their associated feedback and thermal sensor connections.
The compact housing has a depth of 325 mm, which supports installation in cabinets where available space behind the door is limited. Its height is 380 mm, while its front width is 60 mm, allowing adjacent drive modules to be arranged closely while retaining the required airflow clearances. These proportions help preserve access to nearby wiring channels and terminal connections in densely populated control cabinets. Cable entry points remain accessible along the right side, so the inverter can be wired without removing it from the mounting panel.
Technical Specifications
Axis Count
1 Axis
Control Supply Voltage
24 VDC
Depth
325 mm
Height
380 mm
L side Capacity (hp)
1.33 hp
L side Capacity (kW)
1.0 kW
Main Supply Voltage
300 VDC
Motor Compatibility
BL/PREX
Product Type
Okuma Inverter Unit
Weight
5.7 kg
Width
60 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







