E4809-045-084G by Okuma
Get a Quote for E4809-045-084G
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The E4809-045-084G is a printed circuit assembly manufactured by Okuma for the E4809 CNC Boards series. Positioned in the electrical rack of an Okuma machining center, the board links the numerical control CPU with the power section that energizes the spindle motor, allowing rapid acceleration, controlled deceleration, and precise speed control during cutting operations. Its circuitry processes tachometer feedback and generates gating signals for the inverter, thereby maintaining the spindle stability required for consistent surface finishes and tool life.
The board is identified as a VAC-Board-B, a designation that places it in the power-converter backplane rather than in low-level I/O slots. Its dedicated function is spindle drive control, so the circuitry and component layout are optimized for high-frequency current commands rather than axis interpolation. The card measures 49.0 cm in length, 31.0 cm in width, and 5.0 cm in height. This slim profile allows it to fit within a confined rack while providing sufficient trace separation for high-voltage signals. These dimensions also affect enclosure airflow clearances and the required reach of connected ribbon cables and bus bars.
For field adjustment and diagnostics, six DIP switches labeled SW1-SW6 select encoder polarity, torque limit ranges, and soft-start parameters. Three trim potentiometers marked VR1-VR3 allow fine-tuning of current gain, velocity-loop offset, and overvoltage shutdown levels without reprogramming the CNC. A bank of 13 numbered status LEDs provides immediate fault-code visibility, while a separate group of operation indicators labeled M1-M3 displays the ready, run, and alarm states of the spindle drive. The switches, potentiometers, and indicators are positioned along the board edge, making them accessible while the assembly remains installed in its rack. This arrangement permits configuration checks and fault isolation without removing the board from the machine.
Technical Specifications
Board Type
VAC-Board-B
Control Role
Spindle Drive Control
Dip Switches
SW1-SW6
Height
5.0 cm
Length
49.0 cm
Numbered Status Leds
13
Operation Status Leds
M1-M3
Trim Pots
VR1-VR3
Width
31.0 cm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







