E0451-521-037 by Okuma
Get a Quote for E0451-521-037
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The E0451-521-037 is a low-voltage power supply board produced by Okuma as part of the E0451 Power Supply Boards series. Installed behind the CNC operator panel, the board converts mains energy into tightly regulated DC rails that support logic circuits, I/O modules, and small actuators within an Okuma machine tool. By maintaining consistent supply levels, it prevents data errors and unintended motion when spindle loads or ambient temperatures fluctuate during industrial automation cycles.
The factory adjustment sets the main logic rail at 5.1 VDC, giving adequate headroom for TTL devices after cable drops. An onboard trimmer permits correction within that rail, but the adjustment applies to the +5 VDC rail only, so the other rails remain fixed. The card distributes three simultaneous outputs of +5/+12/+24 VDC, allowing digital logic, analog sensors, and relay coils to be powered from one source. It accepts a nominal input of 220 VAC through a single-phase mains connection, eliminating the need for a separate three-phase feed inside compact cabinets. Internal switching and filter sections hold the voltage within tolerance under changing loads without introducing significant ripple.
A dedicated converter stage produces an isolated control rail marked ISO +24 VDC, protecting feedback encoders and field devices from ground loops originating on the logic plane. All outputs are delivered as stabilized DC, reducing the need for downstream regulation on CPU cards. The board follows the power-up policy of CPU first on, CPU last off; this sequence keeps memory contents valid when axes de-energize and prevents brownout resets. Components are enclosed in a metal box housing that shields switching nodes from electromagnetic noise. Four standoffs allow the enclosure to be mounted securely inside the control chassis.
Technical Specifications
5v Factory Setpoint
5.1 VDC
Adjustable Output
+5 VDC Only
Dc Outputs
+5/+12/+24 VDC
Housing Style
Box
Input Phase
Single-Phase
Input Voltage
220 VAC
Isolated Output
ISO +24 VDC
Output Type
Stabilized DC
Power Sequence
CPU First On, CPU Last Off
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







