BLIV-D100A by Okuma
Get a Quote for BLIV-D100A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BLIV-D100A servo drive is manufactured by Okuma and belongs to the BL Servo Drives series. It regulates motor current and velocity for a single axis in machining centers, lathes, and other automated equipment. By converting numerical control commands into proportional phase currents, the drive allows the machine controller to position the load accurately while protecting the motor and power supply. Its single-channel design supports motion control applications that require coordinated acceleration, deceleration, and steady-speed operation.
The drive handles one motion channel through single-axis operation. Its current selection switch supports 15, 30, 50, 75, and 100 A capacity settings, allowing the drive to accommodate motors with different current requirements. The internal architecture consists of a control PC board and a power unit, separating signal processing from high-energy switching components. The velocity monitor jack provides ±10 V at ±3750 rpm, allowing accurate speed measurements during operation. The torque monitor provides 10 V at the torque limit for real-time observation of motor loading. Dip switch SW1 is factory-set to OFF/OFF. At 15 A, SW2 uses the OFF/OFF/OFF/OFF pattern, while the 100 A setting uses the OFF/OFF/ON/OFF pattern to adjust gain and protection. When the axis is set for 30 A or more, connector XB-DBR connects to an external braking resistor; the connector remains disconnected at 15 A.
The housing measures 197 mm in height, 482 mm in depth, and 107 mm in width, allowing it to occupy a narrow column inside the control cabinet. Four M6 mounting holes secure the drive directly to the backplate while maintaining clearance for airflow. The assembly has a mass of 6 kg, making it easier to position during installation. Communication is supported with OSP5020 and OSP7000 CNC systems. The front panel includes LED status indicators as well as torque and velocity monitor terminals, providing direct access to operating information and measurement signals.
Technical Specifications
Axis Configuration
1-axis
Capacity Modes
15/30/50/75/100 A
Drive Architecture
Control PC board + power unit
Mounting Holes
4-M6
Osp Support
OSP5020/OSP7000
Overall Height
197 mm
Overall Length
482 mm
Overall Width
107 mm
Sw1 Setting
OFF/OFF
Sw2 At 100a
OFF/OFF/ON/OFF
Sw2 At 15a
OFF/OFF/OFF/OFF
Torque Monitor
10 V/(Torque limit)
Unit Weight
6 kg
Velocity Monitor
±10 V/±3750 min?¹
Xb-dbr At 15a
Disconnected
Xb-dbr At 30-100a
Connected
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







