BLII-D7575A by Okuma
Get a Quote for BLII-D7575A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BLII-D7575A is a dual-axis servo drive produced by Okuma within the BL Servo Drives series. Designed to supply controlled current to brushless motors on CNC equipment, the unit converts incoming line power into pulse-width-modulated output that follows the machine command stream. By coordinating torque and velocity on each axis, the drive acts as a central actuator interface in automated cutting, milling, and positioning cells.
Its continuous axis capacity is rated at 75/75 A, meaning each channel can deliver its rated current without derating under normal thermal conditions. Control electronics are powered by a single-phase 100 V circuit that isolates low-level logic from the power stage, while the main inverter draws energy from a three-phase 200 V supply commonly used in factories. Current switching is handled by insulated-gate bipolar transistors rated at 75 A and 600 V. These semiconductors provide fast switching and withstand routine regeneration events. Reverse-recovery paths are protected by diodes rated at 50 A and 800 V, limiting voltage overshoot during motor braking. These current and voltage limits establish the permissible load range and help prevent nuisance trips when high-inertia axes accelerate.
The drive supports two motion channels that interface with Okuma 5020 and 7000 numerical controls through dedicated fiber-optic links. An overcurrent monitor activates when instantaneous motor current exceeds more than 150% of the current limit, removing gate signals before device damage can occur. Feedback tuning is aided by the speed monitor output, where ±10 V corresponds to ±3750 rpm, allowing oscilloscopes or PLC analog inputs to track real-time shaft speed. The chassis can operate in shop environments with up to 75% relative humidity. It also tolerates vibration levels of 0.5 g, allowing cabinet placement near spindle heads without additional damping.
Technical Specifications
Axis Capacity
75/75 A
Axis Count
2
Compatible Controls
5020, 7000
Control Circuit Input
1-Phase 100 V
Diode Rating
50 A, 800 V
Humidity Max
75% RH
Igbt Rating
75 A, 600 V
Main Circuit Input
3-Phase 200 V
Ocm Alarm Level
>150% Of Limit Current
Speed Monitor Scale
±10 V = ±3750 rpm
Vibration Limit
0.5 G
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







