BLII-D50A by Okuma
Get a Quote for BLII-D50A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BLII-D50A is a servo drive module produced by Okuma within the BL Servo Drives series. Designed as an amplifier for brushless axis motors, it closes the loop between current demand and delivered torque to achieve micron-level positioning accuracy in numerically controlled machinery. The module mounts inside a machining center cabinet, where it converts three-phase mains power and low-voltage control power into precisely timed switching waveforms that energize a single motor coil set.
At the power stage, the amplifier delivers 50 A of phase current, which is the maximum continuous motor winding current that the unit can regulate. Motor command processing is handled by an SVCII board configured for one axis, so feedback, commutation, and protection logic reside on a single card. The control section is fed by a single-phase 100 V auxiliary supply that remains active when the main bus is isolated. Internal regulators tolerate a control voltage range of 90-121 V RMS, keeping the logic stable during mains fluctuations. The power bus accepts a three-phase 200 V input and operates across a range of 180-220 V RMS. Compatibility with a utility frequency range of 49-62 Hz allows the same hardware to operate with 50 Hz or 60 Hz power systems.
The drive interfaces with Okuma CNC systems through the OSP5020 and OSP7000 controls. Cabinet air temperatures may range from 0 °C to 45 °C, while internal components can operate from 0 °C to 55 °C. During storage, the electronics can withstand temperatures from -20 °C to 60 °C without damage. Continuous operation is permitted at 75% relative humidity, and brief increases to a maximum relative humidity of 95% are acceptable during cleaning or seasonal humidity peaks. Resistance to a maximum vibration level of 0.5 G supports installation on moving carriages or near spindle motors.
Technical Specifications
Amplifier Capacity
50 A
Cabinet Operating Temp
0 to 45 °C
Compatible Controls
OSP5020, OSP7000
Control Board
SVCII Board (1-Axis)
Control Circuit Supply
1-Phase 100 V
Control Voltage Range
90-121 V RMS
Main Circuit Supply
3-Phase 200 V
Main Frequency
49-62 Hz
Main Voltage Range
180-220 V RMS
Operating Humidity
75% RH Max
Short-term Humidity
95% RH Max
Storage Temp
-20 to 60 °C
Unit Operating Temp
0 to 55 °C
Vibration Limit
0.5 G Max
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







