BLII-D30A by Okuma
Get a Quote for BLII-D30A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BLII-D30A is a servo amplifier produced by Okuma for the BL Servo Drives series. Acting as the interface between a CNC controller and a BL synchronous motor, it regulates current and voltage so a mechanical axis follows commanded position, velocity, and torque profiles. This control supports coordinated motion in automated machining and material-transfer equipment. The amplifier processes controller commands and adjusts motor power in response to feedback from the connected axis.
The drive delivers an output of 30 A to the motor windings and is designed to control one mechanical axis. Power for the gate-drive and signal circuits comes from a 100 V AC single-phase control line, while the power stage accepts a 200 V AC three-phase input to energize the motor. Speed feedback uses a ±10 V signal for ±3750 rpm, allowing motor or slide velocity to be observed through a compatible analog monitoring circuit. The main circuit uses an IGBT module rated at 30 A and 600 V to switch current to the motor. Regenerative and surge currents are handled by a diode module rated at 50 A and 800 V. The permissible mains range is 180 to 220 V AC, allowing operation during moderate supply fluctuations.
The cabinet ambient temperature must remain below 55 °C during operation. A vibration tolerance of 0.5 G supports installation in industrial machinery exposed to normal mechanical movement and nearby equipment vibration. Operating humidity must not exceed 75% RH, which helps prevent moisture from affecting internal power and signal circuits. The control section provides a 5 V supply for compatible encoder electronics. A 10 V torque monitor output permits real-time observation of motor loading, while a separate 10 V velocity monitor uses the drive's established speed-feedback scaling. The single-phase control feed separates low-power control functions from the three-phase main circuit used by the motor power stage. These connections allow the amplifier to receive motion commands, process encoder information, and regulate motor current for its assigned axis without requiring a second axis channel.
Technical Specifications
Amplifier Capacity
30 A
Axis Count
1
Control Circuit Phase
1-Phase
Control Circuit Voltage
100 V AC
Control Supply Output
5 V
Diode Module Rating
50 A / 800 V
Igbt Module Rating
30 A / 600 V
Main Circuit Phase
3-Phase
Main Circuit Voltage
200 V AC
Main Voltage Max
220 V AC
Main Voltage Min
180 V AC
Operating Humidity Max
75 %RH
Torque Monitor Output
10 V
Unit Temp Max
55 °C
Velocity Monitor Scale
±10 V / ±3750 rpm
Vibration Max
0.5 G
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







