BLII-D200A by Okuma
Get a Quote for BLII-D200A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BLII-D200A is a servo drive produced by Okuma for the BL Servo Drives series. Intended for integration into CNC and general automation equipment, the unit functions as a closed-loop amplifier that interprets command signals and delivers controlled current to a brushless motor, ensuring accurate torque and velocity regulation during machining, material-handling, or positioning cycles. Its physical footprint matches other Okuma drives in the same family, allowing straightforward placement within an electrical cabinet.
Internally, the drive controls one motion axis, and the dedicated SVC II board performs vector calculations in real time while coordinating the current loops at a high sampling rate. The power stage provides up to 200 A of output current, offering sufficient headroom for brief acceleration demands without signal clipping. Logic and sensor circuits draw power from a separate 5 V source. This low-voltage rail is protected by a 3.2 A control fuse that disconnects the circuit when an abnormal load occurs. A motor overcurrent alarm activates when phase current reaches 150% of the programmed limit, initiating a controlled shutdown to protect the power semiconductors from excessive electrical stress.
Interface hardware is organized through keyed plastic connectors that help prevent incorrect cable placement. The current-command plug contains 20 cavities, while the load-output plug has 2 cavities. The dedicated brake plug provides 5 cavities for electromagnetic brake conductors. Field wiring attaches to M4 terminal screws that accept ring lugs for secure retention under normal machine vibration. For diagnostic measurements, the torque monitor produces 10 V at the torque limit, allowing drive effort to be observed as a proportional analog signal. The velocity monitor provides ±10 V at ±3750 rpm, matching the analog input range used by compatible Okuma control cards.
Technical Specifications
Axis Count
1
Control Board
SVC II Board
Control Circuit Source
5 V
Control Protection Fuse
3.2 A
Current Command Connector
20 Cavities
Load Output Connector
2 Cavities
Motor Brake Connector
5 Cavities
Motor Overcurrent Alarm
150% Of Limit
Power Unit Capacity
200 A
Terminal Screw Size
M4
Torque Monitor Scale
10 V/(Torque Limit)
Velocity Monitor Scale
±10 V/±3750 min?¹
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







