BLII-D15A by Okuma
Get a Quote for BLII-D15A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BLII-D15A is a servo drive produced by Okuma for the BL Servo Drives series. It contains power electronics and control logic that regulate the current and voltage delivered to a brushless motor, allowing closed-loop positioning or velocity control in machine-tool and general automation axes. By coordinating encoder feedback with drive algorithms, the unit supplies torque on demand to a single mechanical axis. The drive can be integrated into CNC cabinets and connected to compatible motion controllers.
The drive uses a single-axis architecture, so each module provides one motor channel. Power for the motor windings is drawn from a main circuit rated at 200 V AC and distributed across a three-phase bus. The permissible mains range is 180-220 V AC, making the device compatible with standard 200 V factory power systems. Auxiliary electronics are energized by a control circuit that operates at 100 V AC with an allowable range of 90-121 V AC. Both circuits accept source frequencies between 49-62 Hz. The cabinet layout separates the single-phase control supply from the three-phase power stage to reduce the transfer of switching noise to the control logic. A torque monitor terminal produces a 10 V output when the drive reaches the programmed torque limit, allowing the signal to be observed by external monitoring equipment.
Internal cabinet air must remain between 0 and 45 °C, while the drive electronics can operate at temperatures from 0 to 55 °C. The allowable humidity is a maximum relative humidity of 75% without condensation. Motion feedback is available as a speed signal scaled at ±10 V at ±3750 rpm, simplifying connections to diagnostic instruments or recording inputs. The proportional output allows external equipment to interpret motor direction and speed from the signal polarity and voltage level. During storage, the assembly withstands temperatures from -20 to 60 °C. Appropriate cabinet ventilation is required to keep the internal air temperature within its permitted operating range during sustained motor loading.
Technical Specifications
Axis Count
1 Axis
Cabinet Operating Temp
0 to 45°C
Control Circuit Phase
1-Phase
Control Circuit Range
90-121 V AC
Control Circuit Voltage
100 V AC
Input Frequency
49-62 Hz
Main Circuit Phase
3-Phase
Main Circuit Range
180-220 V AC
Main Circuit Voltage
200 V AC
Operating Humidity
75% RH Max
Speed Monitor Output
±10 V/±3750 rpm
Storage Temp
-20 to 60°C
Torque Monitor Output
10 V/(Torque Limit)
Unit Operating Temp
0 to 55°C
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







