BLII-D100A by Okuma
Get a Quote for BLII-D100A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BLII-D100A is a single-axis servo drive manufactured by Okuma for the BL Servo Drives series. It functions as the power interface between a CNC controller and a brushless servo motor. The drive converts the machine's three-phase supply into regulated motor current, allowing the connected axis to follow commanded position, velocity, and torque profiles during industrial automation tasks. This closed-loop control supports precise movement in machine tools and other equipment that requires coordinated motion.
The amplifier section can deliver up to 100 A of motor current through its dedicated single-axis SVCII control board. A control check rail supplies 5 V of logic power, while the main power stage receives a 200 V three-phase supply through the R/S/T terminals. If instantaneous current rises above 150% of the current limit, the drive issues an overcurrent alarm and interrupts gating to the U1/V1/W1 outputs. The control circuit receives an isolated single-phase 100 V supply through the AC1/AC2 terminals, separating the command electronics from the high-energy inverter stage. This separation helps protect low-voltage control functions from disturbances originating in the motor power circuit. The single-axis arrangement also keeps control assignments focused on one connected motor.
Continuous operating humidity can reach 75% RH, while brief exposure up to 95% RH is permitted without condensation. The chassis withstands vibration levels of 0.5 G, supporting installation in floor-mounted machining equipment. Motor conductors connect to the drive through the U1/V1/W1 output studs. A differential speed monitor provides ±10 V at ±3750 rpm feedback, allowing an external indicator or PLC input to monitor actual shaft speed. The differential signal helps reject electrical noise that could otherwise affect speed monitoring in an industrial control cabinet.
Technical Specifications
Amplifier Capacity
100 A
Axis Count
1
Control Board
SVCII Board (1-axis)
Control Check Supply
5 V
Control Circuit Phase
Single-Phase
Control Circuit Voltage
100 V
Control Power Terminals
AC1/AC2
Input Power Terminals
R/S/T
Main Circuit Phase
3-Phase
Main Circuit Voltage
200 V
Motor Phase Terminals
U1/V1/W1
Operating Humidity Max
75% RH
Operating Vibration Max
0.5 G
Overcurrent Alarm Level
150% Of Limit Current
Short-term Humidity Max
95% RH
Speed Monitor Output
±10 V / ±3750 rpm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







