BL-D50A by Okuma
Get a Quote for BL-D50A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BL-D50A servo drive is produced by Okuma as part of the BL Servo Drives series. It provides the power and closed-loop regulation required for one axis in a numerically controlled system, translating digital motion commands into controlled current for the connected servo motor. When paired with a compatible DC power module, it forms a scalable drive channel for industrial automation systems that require coordinated motion. This arrangement separates power conversion from axis control while allowing the amplifier to regulate motor torque, speed, and position.
Inside the drive, the control section is implemented on board E4809-770-015, which processes position feedback and generates gating signals for the power stage. The unit uses an architecture with a DC supply and servo amplifier, meaning the DC bus is created in a separate supply while the amplifier modulates that bus to produce the motor phase currents. A single supply can energize up to six amplifiers, allowing multiple axes to share rectifier hardware within the cabinet. Each amplifier governs one motor, preventing current-sharing conflicts and keeping thermal calculations straightforward. The power section is supervised by the dedicated SVC-A servo board, which contains loop-tuning components and diagnostic circuitry. This board coordinates feedback processing with power-stage control to maintain stable axis response under changing loads.
Configuration is handled through onboard DIP switches that are set according to the connected motor model. Selecting the correct setting aligns current limits and resolver parameters without requiring software entry. The drive exchanges command and status data with OSP5020 / OSP7000 control systems, preserving native protocol compatibility across multiple generations of Okuma machinery. Its mechanical dimensions remain consistent with related BL modules, which supports organized installation in multi-axis cabinets. Standardized connector pinouts also allow compatible power, feedback, and control cables to be routed predictably throughout the drive system.
Technical Specifications
Control Board
E4809-770-015
Dip Switch Basis
Motor Model
Drive Architecture
DC Supply + Servo Amplifier
Max Axes Per Dc Supply
6
Motors Per Amplifier
1
Servo Board
SVC-A
Supported Controls
OSP5020 / OSP7000
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







