BL-D30A by Okuma
Get a Quote for BL-D30A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BL-D30A is a servo drive module manufactured by Okuma for the BL Servo Drives series. It forms the power and control link between a CNC controller and a matched servo motor, converting regulated DC-bus energy into a precise three-phase output. By closing its internal current and velocity loops at high frequency, the unit maintains the commanded torque and position on demanding machine-tool axes during production cycles. Built-in diagnostics relay operating data to the host for quick fault isolation.
Key operating parameters are accessible from the front of the amplifier. A front-panel LED indicator provides immediate visual feedback for normal operating status and alarm codes. Protective isolation is handled by an internal NFB circuit breaker that trips during overcurrent events, eliminating the need for external fuses. System wiring converges at the CN1, CN2, CN3, CN4, and CN11 connector set, which separates encoder returns, command lines, and auxiliary I/O. Control logic resides on the SVC-A board, which contains the processor, gate drivers, and feedback converters that regulate the switching devices. The module receives DC-link power from a DC-S1A supply, allowing several drives to share one rectifier while reducing cabinet heat.
The shared DC bus supports configurations for two, three, four, five, or six axes, allocating supply capacity to multiple amplifiers on a single rail. Motor type and gain are set with the SW1, SW2, SW3U, SW3V, SW4U, SW4V, SW5, SW6, SW7, and SW8 DIP switches, eliminating the need for software during initial setup. Three half-bridge outputs, labeled Tr1 and Tr2, Tr3 and Tr4, and Tr5 and Tr6, synthesize sinusoidal current for the connected phase windings. All terminations are housed in a shielded terminal box that separates power wiring from logic wiring. With this arrangement, one supply can feed up to six axes, while each amplifier services a single motor to maintain consistent thermal behavior.
Technical Specifications
Alarm Indication
LED
Circuit Breaker
NFB (No-Fuse Breaker)
Connector Set
CN1,CN2,CN3,CN4,CN11
Control Board
SVC-A Board
Dc Supply Units
DC-S1A, DC-S3A
Dc-ps Control Options
2/3/4/5/6 Axis
Dip Switch Set
SW1,SW2,SW3U,SW3V,SW4U,SW4V,SW5,SW6,SW7,SW8
Max Axes Per Supply
6
Motors Per Amplifier
1
Power Devices
Tr1,2 / Tr3,4 / Tr5,6
Resistor Section
Resistance
Setup Method
DIP Switch By Motor Model
Terminal Interface
Terminal Box
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







