BDU-75A by Okuma
Get a Quote for BDU-75A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BDU-75A belongs to the BDU Servomotor Drives series manufactured by Okuma. It serves as a multi-axis servo amplifier that powers and regulates brushless motors used on machining centers and lathes. Within an Okuma CNC system, the unit converts incoming three-phase power into controlled DC and pulse-width-modulated outputs, allowing the control to execute precise velocity and position loops on each drive axis.
The amplifier accepts a three-phase 220 VAC supply, which is rectified to a shared DC bus maintained at 300 VDC for energy distribution to every attached inverter section. One chassis can house up to six amplifiers, allowing the DC power supply to feed multiple axes from a single source. Command information reaches the BDU-75A over a Digital RCON link, while the IGBTs are switched through a transistor PWM scheme that modulates motor voltage at high frequency to minimize torque ripple. Each inverter supports one brushless motor, and the axis-positioning configuration supports precise incremental moves rather than spindle-speed regulation. The base, BDC, and SVC sections share this DC bus. The SVP board inside the control cabinet supplies the drive-ready signal stream that initiates current loops and gain scheduling.
Closed-loop accuracy is provided by an OSP position encoder, whose speed and position signals return through the drive's feedback ports. Overvoltage protection engages at 430 VDC, while the low-voltage alarm activates when the bus potential falls to 220 VDC; these thresholds protect the drive from improper regeneration and undervoltage latchups. Seven LEDs on the DC power supply and ten on the SVC section report power, fault, and communication status, providing immediate visual diagnostics. The amplifier continuously monitors the speed and position channels. It also applies limit logic through hardware and stops the motor when encoder or PWM anomalies are detected.
Technical Specifications
Amplifier Sections
Base, BDC, SVC
Axis Use
Axis Positioning
Control Signal
Digital RCON
Dc Bus Output
300 VDC
Dcps Capacity
6 Amplifiers
Dcps Led Count
7
Feedback Encoder
OSP Position Encoder
Feedback Signals
Speed And Position
Hv Threshold
430 VDC
Input Supply
3-Phase 220 VAC
Lv Threshold
220 VDC
Motors Per Amplifier
1 BL Motor
Pwm Method
Transistor PWM
Signal Source
SVP Board
Svc Led Count
10
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







