BDU-50A by Okuma
Get a Quote for BDU-50A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BDU-50A belongs to the BDU Servomotor Drives series produced by Okuma. It is a single-axis amplifier that supplies regulated power to one servomotor while exchanging position data through an OSP position encoder. Within an automation cell, the drive links an Okuma machine controller to the motor windings and translates digital motion commands into controlled current. This arrangement allows the connected motor to maintain the commanded torque, speed, and position during machining operations.
The drive accepts a three-phase input rated at 220 VAC, and the command path uses a Digital (RCON) link to synchronize status information and setpoints with the host CNC. Internal rectification charges a DC bus to 300 VDC; from that rail, the amplifier delivers up to 33 A of continuous output current to the motor. The output type is DC, and current modulation is handled inside the inverter bridge without external chopper hardware. The logic section continuously monitors the power stage and initiates a protective trip when bus conditions move outside the permitted operating range. This monitoring helps prevent excessive electrical stress during changes or disturbances in the incoming supply.
The drive uses a Flux Vector control algorithm to support field-oriented current regulation when the encoder returns high-resolution feedback. Overvoltage shutdown engages when the bus reaches 430 VDC, while an undervoltage fault is declared when the bus falls to 220 VDC. These protective limits prevent the amplifier from continuing to operate when its internal power rail is too high or too low. A distributed common power supply can support up to 6 amplifiers, reducing the number of separate supply modules needed in a multi-axis cabinet. The enclosure measures 150 mm high, 420 mm wide, and 220 mm deep, providing a rectangular footprint for cabinet mounting and cable routing.
Technical Specifications
Command Signal
Digital (RCON)
Dc Bus Voltage
300 VDC
Depth
220 mm
Drive Topology
Flux Vector
Encoder Type
OSP Position Encoder
Height
150 mm
Hv Trip Point
430 VDC
Lv Trip Point
220 VDC
Max Axes Per Dcps
6
Motors Per Amplifier
1
Output Current
33 A
Output Type
DC
Pcb Input Phase
3-Phase
Pcb Input Voltage
220 VAC
Width
420 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







