BDU-15A by Okuma
Get a Quote for BDU-15A
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The BDU-15A is a single-axis servo drive produced by Okuma for the BDU Servomotor Drives series. Designed as a DC-input, AC-output power module, it regulates brushless servo motors in machining centers and automated transfer stations. By converting the machine's DC bus voltage into pulse-width-modulated output phases, the unit supplies controlled torque and speed to a compatible Okuma motor. Within a CNC rack, the drive interfaces with the controller and feedback loop to coordinate precise positioning moves and continuous-path control for industrial automation tasks.
Internally, the drive accepts a DC-link voltage of 300 VDC, which is the working voltage modulated by the power transistors into three motor phases. Overvoltage protection engages at 430 VDC, shutting down the bridge before the components experience excessive electrical stress. An undervoltage trip at 220 VDC prevents loss of motor control when the supply voltage drops. The output stage uses AC PWM switching, so current is switched at high frequency to minimize torque ripple. With a continuous motor current capacity of 15 A, the BDU-15A can drive medium-frame brushless axes without exceeding its thermal limits.
The power section is fed from a three-phase mains transformer that delivers 220 VAC, and six rectifiers then charge the common DC bus shared across the rack. Motion commands arrive through a serial Digital RCON stream, allowing the CNC to send position, velocity, and diagnostic data over a single fiber-optic connection. Rotor feedback enters through an absolute position encoder channel, so the axis retains its position reference after power is removed and can resume operation without homing. The control electronics use a dedicated +12/-12/5 VDC control supply, which isolates the logic circuits from the power stage and stabilizes analog reference levels. Because the drive controls one axis, its motor wiring, feedback connection, and operating parameters can be assigned to a single motion channel.
Technical Specifications
Axis Count
1
Check Terminal Count
5
Command Signal
Digital RCON
Control Logic Rails
+12/-12/5 VDC
Dc Bus Voltage
300 VDC
Dcps Led Count
7
Drive Technology
AC PWM
Drive Type
DC Input; AC Output Servo Drive
Feedback Device
Absolute Position Encoder
High Voltage Trip
430 VDC
Input Phases
3
Input Voltage
220 VAC
Low Voltage Trip
220 VDC
Motor Current Rating
15 A
Motor Type
Brushless Servo Motor
Svc Led Count
10
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







