AKM53L-ANC2AA-00 by Kollmorgen

The AKM53L-ANC2AA-00 is a permanent-magnet synchronous servo motor manufactured by Kollmorgen and supplied within the AKM Synchronous Servo Motors series. This rotary unit is intended to deliver closed-loop torque and position control in packaging machines, pick-and-place stations, and other motion platforms that require high dynamic response.

Mechanical holding duties are handled by a 24V holding brake, allowing the axis to remain fixed when the drive is de-energized. Electrical terminations are presented through 2 SpeedTec Ready connectors, so power and feedback lines can be locked without tools to reduce wiring time. For fine position granularity the optical sensing system generates 2048 lines/rev, and this signal is formatted by a BISS B Encoder that transmits absolute data over a digital bus. Because the feedback track is Single turn, optical, the controller receives an absolute position within one revolution; multi-turn counting must be handled upstream if required. The motor is wound with the L designation, yielding a voltage constant suited to medium-voltage drives, and its rotor length index of 3 sets the active stack height to balance torque against inertia.

Interface and mounting details align with automation standards. Feedback is routed through the hybrid connector that supports the resolver pin-out set labeled AD34/AD58. The housing mates to machinery with an IEC with accuracy N flange, ensuring concentricity for gearheads or couplings. A frame side width of 108mm defines the footprint, while a Smooth Shaft eases coupling installation without keyways that can introduce imbalance. Together these mechanical features complement the electrical winding and brake to provide consistent torque delivery, reduced downtimes during service, and precise indexing in high-cycle industrial motion sequences.