00.F5.060-KL10 by KEB

The 00.F5.060-KL10 axis drive is produced by KEB for elevator motion control and is designated as a KEB Elevator Drive. In an elevator control cabinet, the unit regulates motor speed and monitors faults so the lift car can accelerate, travel, and stop smoothly under automatic control. This type of drive is intended for systems that need steady speed changes, repeatable stopping behavior, and clear status reporting from the cabinet. It also works with other KEB motion components and can exchange data with supervisory PLCs through the communication interfaces on the front of the drive.

The front panel uses a Graphic LCD to show live parameters, scope traces, and the event list stored by the four fault logging channels. Operator input is handled by 4 (F1-F4) dedicated function keys, along with separate hotkeys and navigation buttons for Up, Down, Enter, and Escape. The drive has 2 (X6C, X6D) communication receptacles, and each connector has 9 pins. X6C is used for bus communications, while X6D is used for diagnostics and alternate serial assignments. On these ports, CAN and RS-485 signals are available for networked control, and the diagnostic connector also carries RS-232 transmit and receive lines. Internal sampling occurs every 5 ms, which supports the oscilloscope function with short update intervals.

Network service includes FTP for recipe and log transfer, so operating records can be moved without removing the drive from the control system. User text is available in EN, ES, FR, PT, IT, DE, RU, which supports installations across multiple regions and makes on-screen messages easier to follow. The internal clock records events in mm/dd/yyyy format with a 24-hour time base, and displayed values can be shown in metric or imperial units. This helps keep event histories aligned with operating conditions when stored faults and parameter changes are reviewed later. For external sensors, X6D pin 6 provides a +5 V (10 mA) reference.