XM2200.01-01-31-31-301-NN-101NNNN by Bosch Rexroth Indramat

The XM2200.01-01-31-31-301-NN-101NNNN is a compact control platform produced by Bosch Rexroth Indramat within the XM21 IndraControl Systems series. It serves as a programmable logic and motion controller, combining PLC sequence processing with real-time axis coordination for modular machine automation. By concentrating computing, fieldbus routing, and I/O management in a single DIN-rail unit, the device reduces cabinet space and simplifies wiring in multi-axis packaging lines, printing presses, and assembly cells. This arrangement allows one controller to manage machine logic, coordinated motion, and local signal handling from a central point, which helps keep panel layouts orderly and machine response consistent during operation.

An Intel Atom E660 1.30 GHz processor executes control loops and user tasks while maintaining deterministic scan times. The CPU is supported by 512 MB of SDRAM for variable storage, buffering, and visualization-related data handling during active machine cycles. Power is supplied through a regulated 24 V DC input, and the unit draws up to 36 W, which helps determine the required capacity of the control cabinet power supply. Environmental protection corresponds to IP20, so the housing is finger-safe but intended for installation inside a protected control panel. Nonvolatile storage is available for system software and application data, while remanent memory preserves selected variables through a shutdown so machine states and retained values are not lost immediately when power is removed.

For networking, the controller offers an Ethernet service port specified as 1 x RJ45 (1 Gbit) to handle engineering access, OPC UA communication, and higher-level data exchange. Two integrated Sercos interfaces, listed as 2 x RJ45 (Master), support synchronized communication with drives and decentralized hydraulic valves where tightly timed motion control is required. A dedicated inline I/O backplane transfers cyclic process data at 100 Mbit/s and can address up to 63 slice terminals without additional couplers, allowing the controller to collect distributed signals directly through the local station structure. Supplemental ports include one USB host for external data devices and one USB device connection for software transfer, so updates and archived files can be handled without removing the controller from the installation.