XM2200.01-01-31-31-301-NN-100N3NN by Bosch Rexroth Indramat

The XM2200.01-01-31-31-301-NN-100N3NN controller is produced by Bosch Rexroth Indramat and belongs to the XM21 IndraControl Systems series. This DIN-rail device operates as the primary PLC and motion coordinator in automated machinery, executing deterministic logic while exchanging data with drives, HMI panels, and distributed I/O. By combining real-time processing with multi-protocol networking, it provides a compact hub for packaging lines, palletizers, and modular production cells that require synchronized axes and fast cycle times.

At the heart of the unit is an Intel Atom E660 processor that runs at 1.30 GHz, giving the controller deterministic task execution for motion loops and PLC logic. The electronics draw power from a control cabinet bus that delivers 24 V DC; this low-voltage supply simplifies wiring and maintains safety isolation from higher-energy circuits. Two RJ45 ports support Gigabit communication up to 1 Gbit/s, enabling high-speed exchange of process data, OPC UA traffic, or EtherNet/IP messages without an external switch. Under maximum computational and communication load, the hardware dissipates up to 36 W, a figure used to size cabinet cooling and uninterruptible supplies. Mechanical width remains 100 mm, allowing the controller to fit alongside standard IndraControl slice I/O without exceeding a 200 mm panel depth.

The power rail can deliver up to 1.5 A of current before triggering the board's internal protection, while a replaceable 2.5 A fuse guards against short-circuit events. An enclosure rating of IP20 limits use to closed electrical cabinets where dust ingress and accidental finger contact are controlled. Installed mass is only 0.63 kg, so the device imposes negligible load on horizontal DIN rails. Additional dimensional figures include a height of 126.3 mm and a depth of 74.1 mm, both relevant when planning multi-tier enclosures that house power supplies, safety relays, and network switches.