XM2200.01-01-31-31-001-NN-101NNNN by Bosch Rexroth Indramat

The XM2200.01-01-31-31-001-NN-101NNNN is a compact control platform manufactured by Bosch Rexroth Indramat and positioned within the XM21 IndraControl Systems series. Installed on a DIN rail next to drives and I/O terminals, it executes PLC logic, coordinates motion axes, and routes fieldbus traffic to higher-level networks. By uniting these roles in a single housing, the unit streamlines panel layouts and reduces cabling in automated assembly lines, packaging machines, and material-handling cells.

The controller employs a 1300 MHz processor, so cyclic tasks, communication stacks, and visualization services run with deterministic timing. Program data reside in 512 MB DRAM, which is enough for large motion libraries and recipe tables without swapping. External devices connect through a 1 × 1 Gbit RJ45 Ethernet port that carries standard TCP/IP and real-time protocols. Power is delivered at 24 V DC, and under full load the electronics draw 1.5 A while staying within a 36 W thermal budget, allowing convection cooling inside compact cabinets. The housing is rated IP20, so the module must be mounted behind a protective enclosure door. The S20 backplane transfers I/O data at 100 Mbit/s and supplies up to 2 A to the connected slices, and the base configuration has no preinstalled XA-BS01 hardware extensions.

The unit includes a 1 × USB 2.0 host port for memory sticks or diagnostic adapters and a 1 × SD card slot for data backups and process archives. When system size grows, up to 63 S20 modules can be clipped beside the CPU without exceeding the 2 A segment current, which supports mixed digital, analog, and safety terminals. An internal 2.5 A fuse disconnects the controller in case of overcurrent, and diode reverse-voltage protection prevents damage if supply polarity is accidentally reversed.