VT 3002-1-2X-15H by Bosch Rexroth Indramat

Get a Quote for VT 3002-1-2X-15H

Request a quote or call us now at 1-888-551-3082!

Call For Quote

We respect your privacy. Your information is safe and will never be shared.

Secure Online
Checkout

Free Ground
Shipping

One Year
Warranty

The VT 3002-1-2X-15H is an analog amplifier card manufactured by Bosch Rexroth Indramat for the VT 3000 Analog Amplifiers series. It conditions low-level control signals and supplies regulated current to proportional hydraulic valves, allowing PLCs to modulate pressure or flow without separate power hardware. The card fits standard automation racks and reduces panel depth by combining signal processing and power output on a compact board. This integrated arrangement also reduces the amount of wiring required between the control stage and the valve output circuit.

The board follows the Single Euro-Format outline, so its 100 × 160 mm footprint aligns with DIN 41494 card cages. The power stage can deliver an output current of up to 15 A, providing sufficient magnetizing force for large proportional solenoids. Field terminals accept a maximum of 48 VAC/DC for use with low-voltage wiring. The rack interface uses a 15-pin Form H DIN 41612 rear connector that mates with the even-numbered contacts on rows d and z, helping prevent misalignment during insertion. A screw or DIN rail mounting plate supports direct panel attachment or installation on a standard TS-35 rail. These mounting options allow the card assembly to be positioned according to the available cabinet space and support structure.

A front-panel lever provides the required locking method, enabling quick extraction during service while resisting movement caused by vibration. Plug-in screw terminals accept conductors with cross-sectional areas of up to 6 mm², accommodating the wiring needed for the available output current. The clamping blocks are oriented vertically to the rail so wiring can enter from above without sharp bends near the terminals. Two mounting holes, each 4.2 mm in diameter, provide fixed support when rail mounting is not used. Their spacing aligns with the rail centerline to maintain a stable installation position. The card has a mass of 0.5 kg, minimizing the mechanical load placed on cabinet mounting surfaces. The lever applies consistent seating pressure to the edge contacts when the card is secured in its operating position.

Technical Specifications

Card Format
Single Euro-Format

Current Capacity
15 A

Hat Rail Orientation
Vertical

Locking Method
Lever Actuation

Max Terminal Voltage
48 VAC/DC

Max Wire Cross-section
6 mm²

Mounting Hole Count
2

Mounting Hole Diameter
4.2 mm

Mounting Type
Screw Or Hat Rail

Pinout
Even-Numbered, Rows d/z

Socket Connector
15-Pin, Form H, DIN 41612

Terminal Type
Plug-In Screw Terminals

Weight
0.5 kg

Click here for product datasheet

Contact Us

1620 Old Apex Road, Cary, NC 27513, USA

Toll Free: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Email: sales@wakeindustrial.com

Shipping Options

DHLFedExUPSFreight

Payment Methods

American ExpressMasterCardVisaWire Transfer

Need Assistance?

Our team is here to help you find the right part for your needs.

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Automation Factory warranty on ALL products