VT 3000-3X-SO43A-1635 by Bosch Rexroth Indramat

Get a Quote for VT 3000-3X-SO43A-1635

Request a quote or call us now at 1-888-551-3082!

Call For Quote

We respect your privacy. Your information is safe and will never be shared.

Secure Online
Checkout

Free Ground
Shipping

One Year
Warranty

The VT 3000-3X-SO43A-1635 analog amplifier is produced by Bosch Rexroth Indramat as a member of the VT 3000 Analog Amplifiers series. It installs on a standardized rack inside hydraulic control cabinets and conditions reference signals for proportional solenoid valves. By transforming a voltage command into a controlled current, the card enables stable positioning, pressure regulation, and flow balancing in automated presses, machine tools, and conveyor systems. Its compact format suits multi-axis installations where several amplifiers share a common backplane.

The card accepts a command range of ±9 V and provides a fixed 20 mA bias so the centered spool position can be preset without external trimming. Nominal operating power is supplied at 24 VDC ±10%, with total power consumption limited to 30 W. The output stage delivers up to 800 mA of coil current. A board-mounted fuse rated at 2.5 A in a 5 × 20 mm holder protects the card against short-circuit faults. For calibration, a front test socket follows a scale of 1 mV per 1 mA, allowing exact verification of coil current with a standard voltmeter. These electrical connections allow the amplifier to receive controller commands and regulate the connected valve coil through its output stage.

The driver supports a maximum load resistance of 19.5 ?, while the control input requires a minimum resistance of 500 ? to maintain consistent loop gain across compatible valve families. Temperature drift is limited to 0.5?/K, helping maintain current stability as the surrounding temperature changes. Installation requires a faceplate width of eight plug-in divisions, with seven divisions free on the component side and one division on the conductor side. Each Eurocard division has a pitch of 5.08 mm, which establishes the required rack spacing. The module has a mass of 0.15 kg, minimizing stress on the card guides inside the rack.

Technical Specifications

Bias Current
20 mA

Component Side Space
7 Divisions

Conductor Side Space
1 Division

Division Pitch
5.08 mm

Face Plate Requirement
8 Divisions

Fuse Rating
2.5 A

Fuse Size
5 × 20 mm

Input Control Voltage
±9 V

Maximum Output Current
800 mA

Maximum Output Load
19.5 ? Max

Minimum Input Load
500 ? Min

Power Requirement
30 W

Power Supply Voltage
24 VDC ±10%

Temperature Drift
0.5?/K

Test Point Scale
1 mV = 1 mA

Weight
0.15 kg

Click here for product datasheet

Contact Us

1620 Old Apex Road, Cary, NC 27513, USA

Toll Free: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Email: sales@wakeindustrial.com

Shipping Options

DHLFedExUPSFreight

Payment Methods

American ExpressMasterCardVisaWire Transfer

Need Assistance?

Our team is here to help you find the right part for your needs.

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Automation Factory warranty on ALL products