VT 3000-3X-ES43A8-2590 by Bosch Rexroth Indramat
Get a Quote for VT 3000-3X-ES43A8-2590
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The VT 3000-3X-ES43A8-2590 is an analog amplifier card manufactured by Bosch Rexroth Indramat for the VT 3000 Analog Amplifiers series. Installed in a valve control rack, the card conditions command signals and drives proportional solenoid coils so that hydraulic actuators follow references issued by a PLC or motion controller. It fits into a 32-pin Eurocard backplane and uses onboard potentiometers, LEDs, and relays to adjust and monitor each axis without external modules.
The amplifier draws a regulated supply of 24 VDC ±10%, and its circuitry consumes up to 30 W during normal operation. The output stages deliver a regulated current that can peak at 800 mA and has a minimum value of 20 mA. These limits maintain consistent magnetic force on proportional valves across their stroke. A maximum coil resistance of 19.5 ? keeps the load within this current range at the available supply voltage. The current loop remains stable when the controller or signal source presents a load of at least 500 ?. The card also accepts an additional ±6 V trim input, allowing the primary command to be offset or scaled without changing the upstream controller.
Thermal stability is supported by a temperature drift of only 0.5 ?/K, which minimizes span changes in hot control cabinets. Overcurrent faults are cleared through an onboard fuse rated at 2.5 A, protecting both the card and the valve coil from damage. A differential reference of 10 V drives the high-impedance input stage, while a separate control path tolerates signal swings of ±9 V for fast override functions. Six changeover relays route enable or fault lines. Four potentiometers provide gain and ramp adjustment, and four diagnostic LEDs report operating states. The printed circuit board weighs 0.15 kg, keeping panel mass low when multiple axes are installed.
Technical Specifications
Additional Command Input
±6 V
Card Format
32-pin Eurocard
Differential Input
10 V
Fuse Rating
2.5 A
Input Control Voltage
±9 V
Input Pot Count
4
Led Count
4
Max Coil Resistance
19.5 ?
Maximum Output Current
800 mA
Minimum Input Load
500 ?
Minimum Output Current
20 mA
Power Requirement
30 W
Power Supply Voltage
24 VDC ±10%
Relay Count
6
Temperature Drift
0.5?/K
Weight
0.15 kg
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







